In rare situations it might happen that the mirrored SSD drives used for the Operating system need to be set-up from scratch when not only one, but both SSD drives used in the RAID-1 mirrored setup need to be exchanged with two new drives (e.g. Both SSD have been removed or were missing during first install attempt or imaging process from the recovery DVD. It is strongly recommended to always open a Technical Support Case at the local BOSCH Security Systems Level 1 Support team / help desk. Report the the following details to the support:
How to add two brand new SSD drives as system and OS drive to a
The two SSD drives are set-up in a mirrored RAID configuration (RAID-1) and it is not expected that two drives fail at the same time.
Also it is expected that DIVAR IP systems are installed at a secure environment or room and both SSD drives are not expected to be removed at the same time.
Nevertheless, this article will explain how to set-up the RAID quickly in order to start the "re-imaging" process from the Recovery DVD (one at DIVAR IP 6000 R2 - or two DVDs at DIVAR IP 7000 R2) enclose to each DIVAR IP 7000 R2 or DIVAR IP 6000 R2 delivery.
The following steps can be performed to get the system back to a state to run the regular recovery process.