In August 2018 (10-08-2018) the VRM version 03.71.0029 was released.
The Video Recording Manager 03.71.0029 is fully supported with BVMS 8.0 and Product Management of BVMS and VRM recommend to use this VRM version instead of the former Release version of VRM 03.70.0056.
One of the main bugfix reasons to use VRM 03.71.0029 is a fix in regards to correct display and replay of recorded clips in continous and alarm recording mode. This fix is listed on page 2 of hte attached Relase Letter.
For Troubleshooting and support reasons it is essential to double-check a reported gap in recording and to analyze on Level 2 and Level 3 support side what circoumstanced could lead to a video gap.
See in the following chapter what kind of data a trained BOSCH partner, Installer or Video expert should provide to the BOSCH Technical Support to advise on next steps. The data described here below can and should be collected before the software VRM is changed and updated to a latger version.
Note: Video Recording Manager version 03.71.0029 is not the latest available version of VRM, but in combination with other 3rd party implemantation or usage of special BOSCH VMS software version (e.g. BVMS 8.0) this VRM version 03.71.0029 may be required.
In certain situations and troubleshooting scenarios extended logfiles might be required. The BOSCH Level 1 and BOSCH Level 2 team will assist all users on how to collect these data and cooperate with the BOSCH Level 3 Support where needed.