The Release Letter of the combined firmware package for all platforms 6.60.1321 provides information about the dependencies between firmware versions for a better understanding of the upgrade process of devices with older firmware.
CCP4 and CPP6 devices:
Due to an internal file system being introduced to CPP4 and CPP6 since firmware 6.10 and architectural changes thereof, a direct upgrade from firmware below version 6.10 to latest firmware is only possible via intermediate firmware 6.1x.
This combined firmware cannot be applied to CPP5 products with firmware version older than 5.91. It is required to upgrade to intermediate firmware 5.91 first
This means that intermediate firmware version 5.91 for CPP5 needs to be requested from your technical support. Only after receiving and uploading firmware 5.91, you can upload combined firmware package for all platforms e.g. 6.50.0620 or CPP5 specific firmware 6.30.0059.
To find a combined firmware file in the downloadstore you can use the folowing URL syntax:
or you use the CPP 6.50 combined file here:
and Releaseletter of that combined firmware package:
Note: Upgrading from versions lower than 5.5x
To upgrade to a newer firmware version using this combined firmware package, firmware versions before 5.5x require an intermediate update cycle using the respective platform firmware version mentioned above.
(Note: In case any link might not work to the current DownloadStore, see attached a copy PDF of the Release Letter.)
The procedure to request and get an legacy firmware that is no longer online in the web is as follows:
The above mentioned combined firmware 6.50 supports:
The combined firmware package includes the following build versions:
For detailed description please refer to the separate release letters.
Customers can upload such combined firmware packages by using multi-select in the Configuration tool "BOSCH Configuration Manager" (currently available in version 06.01.0157 at the BOSCH DownloadStore or Product catalog > Video Software > Video Management Systems > Configuration Manager)
When using the multi-select option in Configuration Manager, please make sure this combined firmware package for all platforms can be uploaded to all the devices selected and there are no additional requirements or intermediate steps needed for any of the devices in question.
This article has status of 31st of October 2018 and changes in this procedure might be introduced. When changes are done, then this article will be updated. Therefore check this article from time to time.