About VS-Support-AP

Question    How is the M12 connector termination for FLEXIDOME micro 5000 MP?   Answer   Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system. Assembly consists of three easy steps, none of which require specialist tools. The plug connectors, compliant with all standards and fully shielded against EMC interference, are available in four-pin and eight-pin configurations. They can be connected to flexible or rigid wires, with sizes ranging from AWG 26 to AWG 22. This makes the connectors suitable for all Industrial Ethernet transmission systems, Ethernet-based fieldbus systems such as Profinet, and EtherNet/IP up to gigabit speeds.   The M12 Quickon connector provides a sturdy metal housing with a plug-and-turn mechanism. A 360 degree shielding connection with an iris spring means the connector is well suited to system environments with large amounts of EMC interference. The compact design of the RJ45 Quickon connector, on the other hand, makes it suitable for horizontal or vertical multi-port connection (as is frequently required by switches, for example). Connector ID rings are available in eight colors to visually aid patch-bay layout.  ... View more

Question   Can I display MPEG 4 video on VIDEOJET decoder 3000 ?   Answer   No. VIDEOJET decoder 3000 is only capable of decoding H.264 video. ... View more

In Bosch VMS it is possible to assign an LDAP user group to a Bosch VMS user group. This article describes why it is important to not assign the same LDAP user group to multiple Bosch VMS user groups.   Related Products   Bosch VMS   Behavior When logging on to Bosch VMS Operator Client as LDAP user, the granted user permissions and user rights are not as expected.   Step-by-step guide   Examples: - When logging on as LDAP user, the permissions and rights of user group "A" are granted although the permissions and rights for user group "B" were expected. - When logging on as LDAP user, the permissions and rights of Enterprise group "A" are granted although the permissions and rights for user group "B" were expected.   Make sure that every Bosch VMS user group has an exclusively dedicated LDAP user group to avoid that unexpected user permissions and rights are granted.   Notes Unexpected user permissions and user rights for LDAP users are most probably caused by invalid Bosch VMS user group settings. When setting the same LDAP user group for two different Bosch VMS user groups "A" and "B", the LDAP user will get the permissions and rights of one of the user groups, for example user group "A". This result might be unexpected if the expected behavior was that the logged on LDAP user gets the permissions and rights of user group "B". Note: When setting the same LDAP user group for a local Bosch VMS user group "A" and an Enterprise user group "B", the granted user permissions and user rights will always be the user permissions and user rights of Enterprise user group "B". In this case, the user permissions and user rights of user group "A" will never apply when logging on as LDAP user.   Associating an LDAP group (page 115) How to configure BVMS to connect to an LDAP and use it as a base for user authentication?  ... View more

Related Products Allegiant LTC 8100 LTC 8200 LTC 8300 LTC 8500 LTC 8600 LTC 8800 LTC 8900 TC 8301 TC8500 TC8600 TC8700 TC8800   Need to see cameras from remote Allegiant across the network?     Step-by-step guide   Connect Allegiant to the VIP X1 XF as per attached drawing and connect VIA Internet Explorer to the VIP X1XF set in Allegiant mode(TC8X00).    Note Given that the Internet Explorer 11 desktop application has retired and is out of support as of June 15, 2022 for certain versions of Windows 10, the new PCs have only Microsoft Edge installed on them or Microsoft rolled out the New Edge browser automatically via Windows Update. There is an Internet Explorer extension for Microsoft Edge and you can enable it. More details here: What is Internet Explorer (IE) mode? ... View more

Possible causes and solution(s)   Causes   Related Products   Bosch Recording Station (BRS) version 8.9 and later   The UDP tunneling cannot be configured on BRS. Network cards are grayed out.   Solution   Under certain circumstances BRS NetLimiter may become not registered. The network cards are not shown in Configuration > Security and Network > Network settings. In that case, register BRS NetLimiter manually: 1. Close BRS application 2. Control Panel > System and Security > Administrative Tools > Services > Bosch Networking Service    a) Set "Startup Type" to "disabled"    b) Stop service    c) In a console window with administrative rights, enter "C:\Program Files\Bosch\Recording Station\NetLimiterServer" /service    d) Set "Startup Type" to "Automatic"    e) Start service 3. Start BRS application ... View more