This article provides instructions for exporting and saving the program from an FPA-1000 to be imported into a replacement FPA-1000 panel.
This information may be needed when replacing an FPA-1000 fire panel with another with intentions to use the same panel program.
How to configure the FPD-7024 to communicate by phone using keypad programming.
How to use keypad programming to configure the FPD-7024 for phone communications.
This feature blocks the programming feature through the keypad of the FPD-7024.
This feature is only enabled via RPS.
Step-by-step guide
1 Connect to the Panel via RPS an Open the FPD-7024 programming sheet.
2 Go into Program Accounts and Remote Access Security.
3 Open Anti-takeover Setting and Select "Lock all local programming (except Date/Time and all user PINs)" to block the programming via keypad of the panel.