Fire

A modification of the sensor group icon is possible but requires a different file naming than for detectors

Library is offering 3 different sizes of detectors and can be customized. See this article and find out how you can customize Symbols (icons) - FSM

This article presents step by step how to configure the “E-Mail Sender” function in FSM.

To silence all NAC's of one panel (FPA-5000/Avenar) from the map in FSM Step-by-step guide   Insert a sensor on the map of FSM Under sensor properties choose: General: Add symbol: FIRE_Panel_FPA_BG Settings: Driver Instance: the panel / compound where the FSM is belongs to Address-> e.g. Panel 1-10.1 ! Please pay attention: there are other “Panel” possibilities to choose. Please do not choose Panel 1-10 (Communication)! After inserting the settings click “ok” Then Apply At the map when you right click the panel symbol you will get the commands as shown below.   If there is a fire alarm, you can right click at the panel and then click at “silence on”. Please be sure, that then every NAC which is belonging to this panel is “silenced”. Additional: there is also a command "silence scope" which then has the effect, that the whole scope will be silenced.

Live time event printing is supported. To enable it, add a xml file in program data folder with the name of the printer.

This article explain what should be done if new detectors are added to the system. 

Check this article and find out what's new in FSM version 5.6.1

This article contains the FSM - Anomalies symbols and their description

Follow the steps from this article to see the labels from the sensors in FSM which are configured in RPS

Follow this step-by-step guide from this article and find out how to stop and restart the FSM Server service

This article explains if possible to install Fire monitoring system (FSM) in a virtual environment

Is always recommended to backup the database before running the default process. Find out in this article the steps to restore default FSM (Fire Monitoring System) configuration

To check Directx and graphics card capability you can use the dxdiag tool provided with Windows OS.

The license key is not stored in plain text therefore is not possible to view, but the associated order number can be identified.

Check out this article and find out where are the FSM Alarm and Events logs stored and what is the size limit

If FSM needs to be connected to a new panel (network), then proceed as it is described in this article:

In cases where RPS configuration cannot be loaded please follow the instructions from this article.

Any related HW change in the FSM server will lead to license not being valid and will need to be transferred.

This articles shows where can you restart the activation or delay period in FSP-5000-RPS if a new activation is triggered

Learn from this article how to enable usage type Fire on KD55 element from Bosch Remote Programming Software (RPS)