Fire

Library is offering 3 different sizes of detectors and can be customized. See this article and find out how you can customize Symbols (icons) - FSM

Is the status displayed when Supervisory Usage type is selected in RPS - Bosch Fire Monitoring System?

Follow the steps from this article to see the labels from the sensors in FSM which are configured in RPS

This article is a step by step guide about how to create panel container on map by using Macro-Area (point) on FMS.

This article response to the question if there is an automatic time sync between FSM and panel?

This article answer to the question: Is the usage of command and digital properties function supported -FSM?

Is it possible to use complex maps on the FSM client? Recommendation is not to use very complex maps, very complex maps (means big size DWG files) can be made “lighter” by reducing the number of vertex (e.g. remove texts in DWG file and make rather use of the FSM text feature)

This article explains is we can use Remote desktop to run or use the FSM client. When using remote desktop the error below will be shown when remote desktop is minimized and then maximized, the only option is to close the FSM client and start again.

This article contains the FSM - Anomalies symbols and their description

To silence all NAC's of one panel (FPA-5000/Avenar) from the map in FSM Step-by-step guide   Insert a sensor on the map of FSM Under sensor properties choose: General: Add symbol: FIRE_Panel_FPA_BG Settings: Driver Instance: the panel / compound where the FSM is belongs to Address-> e.g. Panel 1-10.1 ! Please pay attention: there are other “Panel” possibilities to choose. Please do not choose Panel 1-10 (Communication)! After inserting the settings click “ok” Then Apply At the map when you right click the panel symbol you will get the commands as shown below.   If there is a fire alarm, you can right click at the panel and then click at “silence on”. Please be sure, that then every NAC which is belonging to this panel is “silenced”. Additional: there is also a command "silence scope" which then has the effect, that the whole scope will be silenced.

This article explains if possible to install Fire monitoring system (FSM) in a virtual environment

This article explains step by step how to enable commands for operator (other than admin) in FSM

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

Have a look at this article and see how you can setup the FMS - OSD Logo

The cause of the error is combination of group address and the text length of the group label as defined in RPS as shown in this article

A modification of the sensor group icon is possible but requires a different file naming than for detectors

Learn from this article how to enable usage type Fire on KD55 element from Bosch Remote Programming Software (RPS)

Follow this article and learn about the option which allows you to configure the color for each state & sensor in FSM

This article answer to the question: "Can a fire alarm have the same sound as the one for a fault?"

If the Item "Panel" is e.g. 1-1.1.1 respectively 1-1.SI_PANEL.1,then this item is the Group item of the panel system status items e.g. 1-1.1.1-1 till 1-1.1.1-10. Most of these system status items have NORMAL as value after startup, others can have ON, e.g. items from Condition Monitoring.