Fire

In the event of flames and smoke, the camera's built-in intelligent algorithms analyze the scene in real time by concatenating and transforming the input data. Deep learning AI directly analyses the data and if a fire is confirmed, it triggers an alarm and sends a signal either to the fire panel or the Video Management System.

Thanks to the latest AI technology and deep learning methods, the newest generation of fire detection cameras AVIOTEC 8000i IR becomes the best, fastest and more robust option for applications where traditional detectors might find limitations.

AVIOTEC 8000i IR achieves an average of 3x faster detection times compared to current Aspirating Smoke Detectors*.

Typical application areas: Industrial manufacturing; Transportation: airports & railways; Logistics and warehouses; Parking: eMobility

This article provides instructions for troubleshooting Ground Fault in the FPD-7024 or D7024

Do you want to move the license activated on existing computer/server to another computer/server (FSM - Fire Monitoring System)?

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

This article indicates where you can find the log files for FSM client and for FSM server

The cause of the error is combination of group address and the text length of the group label as defined in RPS as shown in this article

This article describes how to capture the panel/ controller communication log when requested by Technical support.

Panel controller displays can become de-calibrated, e.g. upon initial power-up followed by unintentional contact with the display or inaccurately touching the crosshairs.  It becomes noticeable after the panel controller has re-booted and does not respond properly to touch.

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, D8125MUX, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, B600, B299, D8125, FPA-1000, FPA-1000-V2, FPE-7039, D7039, DS9431, FDP-7024, D7024, DS9400, DS9400I, DS8400M, D10024A, D10024, D9024, D8024, D7212B, D9112B, D7212B1, D9112B1, D7212, DS7430, DS7436,

This article contains the RCP+ CGI commands for AVIOTEC starlight 8000 that helps you to enable or disable the scene quality (bright or dark)

This article contains the RCP+ CGI command for AVIOTEC starlight 8000 that helps you to adjust the VCA darkness or brightness level

The table below shows the current FSM, FSI and MPC versions compatibility:  

This article answer if the labels or texts automatically updated in FSM after change in RPS.  

This article answer to the question: " What is the maximum of simultaneous client connections supported on FSM?"

This article is a step by step guide about how to create panel container on map by using Macro-Area (point) on FMS.

How to replace existing map or background on FSM client?

Is it possible to use complex maps on the FSM client? Recommendation is not to use very complex maps, very complex maps (means big size DWG files) can be made “lighter” by reducing the number of vertex (e.g. remove texts in DWG file and make rather use of the FSM text feature)