Fire

D125X Keypad is not displaying System Faults

Part numbers FPA-1000, FPA-1000-V2, FPE-1000-NE, FPE-1000-NW, FPR-1000-NF  

This article discusses how to send reports to the CS (Central Monitoring Station) from the FPA-1000-V2. We can network up to 8 of the FPA-1000-V2 panels together.  Each panel can report to the CS by itself, or one panel can report for all.  In either configuration, each panel needs its own unique account number.  

Steps to enable a SLC card in slot 2

How to test the D382 or Macurco GD-2A Combustible Gas Detector

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2

Question I get to the FPA-1000 browser Start page. When I click on Login I get the following message: Invalid PIN - A PIN must be a 4 Digit number. Please check that Number Lock is On. What should I do?   Answer   Add the FPA-1000-UL IP address to the list of trusted sites, and your login will work correctly. A Crossover cable is required to connect directly to the panel. To enable JavaScript and cookies in Internet Explorer, add the FPA-1000-UL IP addresses to the list of Trusted Sites: Tools menu: Select Internet Options. Select the Security tab. In the settings for Trusted Sites, click Sites. Add the FPA-1000-UL IP address to the list of trusted sites.

Overview When devices are connected to the Option Bus on the FPD-7024, the bus must be scanned allowing the panel to see the device. After removing devices, such as the DX4020, DX4010V2 or DX4010i, the option bus must be scanned again to complete the removal, or the panel continues to supervise the device resulting in a keypad display: Trouble DX4020 and history event: SYSTRB017. Issue After completing programming the panel reports trouble DX4020; history shows SYSTRB017 Solution After removing the DX4020, DX4010V2 or DX4010i, the option bus must be scanned again to complete the removal or the panel continues to supervise the device.  From the Panel Keypad (not a remote keypad) perform the following steps to update the option bus: Select 0 for PROGRAMMING and enter the installer code Select 3 for PROGRAM SYSTEM Select 4 for OPTION BUS Select 1 for UPDATE BUS

Question What does it mean when the panel displays a trouble of "Dialer Answering Unknown"?   Answer   "Dialer Answering Unknown" is caused by the panel answering an incoming phone call. This will cause a trouble tone from the panel that will clear itself when the panel releases the line, this may take up to 10 minutes. If another event (Alarm, Trouble, Supervisory) occurs during this time, the panel will drop the line and dial out to the central station. To prevent or stop this set the Line 1 Ring Count to (0).  

Part numbers D8125MUX, D7050, D7050TH, D5060, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G,

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G

How to use the DX4010V2 for connecting to the FPD-7024 with RPS. How to correct the FPD-7024 indicating Trouble Missing DX4020 or DX4010V2.  

Overview This article discusses the discrepancy between documented poll rates on an ITS-DX4020-G. Issue The Bosch Cellular Service User Guide states that for Fire applications we should go with a Poll rate of 240 Ack wait of 10. the current ITSDX4020-G O/I guide says Poll at 60 Ack wait 13. Which is correct? Solution 240 seconds with 10 second retries is correct for the current NFPA72 regulations for Fire. This used to be 60 seconds in the old NFPA72 standard.

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, D9127, D9127T, D9127U, D8127, D8126

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7212G, D7412G, D9124G, D9412G, D7212GV2, D7412GV2, D9124GV2, D9412GV2, D7212GV3, D7412GV3, D9412GV3, D7212GV4, D7412GV4, D9412GV4, B8512G, B9512G, FPD-7024, D7024, DS9400, DS9400I, DS9400M, D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2, B465

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400, RPS, DX4010-V2,

DS200 & DS200HD Smoke Head replacement