Bosch Cloud VMS allows event-based and continuous cloud recording of connected cameras. This function is independent from storage of alarm/event clips that are part of "Alarm Management".
Please make sure that these pre-conditions are met:
You have access to a VSaaS/Cloud VMS instance
The camera that you want to configure for Cloud Storage is connected to the Cloud VMS
You have activated the appropriate Cloud Storage license in Remote Portal for the respective camera
Note: Pre-alarm recording is not available for Bosch and ONVIF cameras.
Set the right recording mode and the appropriate retention time.
Standard retention times are 7, 14, 30 days of retention. Exceptions and specific retention times can be offered on request for users of a dedicated VSaaS instance.
The storage size is fixed and defined by the activated license in the Remote Portal.
After configuration your cloud camera is all set and you should be able to see video from the camera in the Cloud VMS Live View.
Note: To set up a Live View service, please follow the article Cloud VMS Configuration: How to set up a Live View service?
You can reach the Live View by logging into your VSaaS instance as an operator.
The HTML5 Video Control then provides the following functionality for live video and playback of the cloud recording.
Playback mode details:
4: Enable audio playback from the recordings and control the volume.
7: Select pre- and post alarm recording to be exported.
On the Bosch Storage Calculator (https://www.boschsecurity.com/storage-calculator/) you need to use the following parameters to calculate the required cloud storage for your Bosch camera:
In the bottom of the calculator screen you will see the required bandwidth for the uplink and the required storage.
Choose the right storage license (CBS-REC-....) with a maximum storage allowance higher than the indicated size in the storage calculator from your local pricelist.