It is advisable that any actions performed on a Bosch Video Management Server to be done by a trained installer.
Please join the web-based trainings on Bosch Building Technologies Academy.
⚠️ Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application.
Keep in mind: If you want the latest version of BVMS, it must be downloaded and applied with the latest version of System Manager.
When updating DIVAR IP appliance (DIVAR IP all-in-one 4000 & 6000), managed by DIVAR IP System Manager, special corresponding packages are required to upgrade BVMS on these devices.
💡 Good info to know: Usually, we recommend to upgrade BVMS in steps. Each version should not be more than ~two years apart. This prevents potential issues in the upgrade process.
In this article, this is not the case. Given that there are less than ~two years apart between BVMS v11.1.1 and BVMS v12.1, you can upgrade the BVMS directly to the 12.1 version through DIVAR IP System Manager, without any additional steps in between.
BVMS version release dates:
Installation prerequisites and operation notes
– The system must be connected to an active network during initial boot and package installation.
– DIVAR IP System Manager application version 2.1.0 or higher shall be installed and started. For the current latest BVMS version 12.1 it would be recommended to upgrade DIVAR IP System Manager to v2.3.0
Below are the steps that must be done to upgrade BVMS from version 11.1.1 to version 12.1 on DIVAR IP all-in-one 4000 & 6000:
1. Make sure that you have DIVAR IP System Manager installed on your devices. It is recommended to have/ upgrade the DIVAR IP System Manager to v2.3.0
If you have DIVAR IP System Manager version lower than 2.3.0 running on your system, please be sure that before installing DIVAR IP System Manager v2.3.0, first you uninstall the older version. Otherwise, if you try run directly the DIVAR IP System Manager v2.3.0 installer, it will not allow you to perform the installation properly. If you do that, “System Manager is already installed in this machine” message will be displayed, and the installation will not be finalized. |
2. Download BVMS 12.1.0 System Manager package 1.0
also available on Download Area |
and follow this YouTube video regarding the upgrade process or continue to follow the steps as explained below (3-10):
3. Save the BVMS 12.1.0 System Manager package 1.0
and BVMS_12.1.0_Updates_SystemManager_package_1.4 to a storage medium such as a USB stick.
Note: Installing System Manager from any other location than the USB stick is not supported and a factory default might be required!
4. Unzip the files on the storage medium.
5. Connect the storage medium to your DIVAR IP all-in-one 4000/ 6000 system
6. Start the DIVAR IP System Manager application:
– If you are signed in to Windows with the BVRAdmin administrator account, double click the DIVAR IP System Manager icon on the Windows desktop. The DIVAR IP System Manager application starts.
– If your system is running in BVMS operation mode, click the DIVAR IP System Manager icon on the BVMS desktop and sign in to the BVRAdmin administrator account. The DIVAR IP System Manager application opens in a full screen dialog box (You can exit the dialog box by pressing ALT + F4).
7. In the column Software packages Name, click the respective option button (BVMS) to select the software application that you want to upgrade
8. In the column Available version, select the BVMS 12.1 to which you want to upgrade your software application and then click Next. If applicable, a license agreement dialog box is displayed.
9. Read and accept the license agreement, then click Install to continue. The installation starts and the installation dialog box shows the installation progress. Do not turn off the system and do not remove the storage media during the installation process.
10. After all software packages are installed successfully, you will receive the message Installation finished successfully at the top of the page
Nice to know:
The Initial system setup and Choosing operation mode or Upgrading software instructions in the DIVAR IP all in-one 4000 systems are also available in Installation Manuals and User Manuals, and in the Application Note "DIVAR IP all‑in‑one Remote Portal connectivity".
When a major software application of the Operation mode is upgraded (for example, BVMS application in the Full video recording and management system, including BVMS, VRM and iSCSI storage Operation mode), corresponding dependent software applications are also upgraded (for example, VRM, VSG, etc.)