Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Who rated this article

    How to upgrade DIVAR IP 6000/7000 R2 to the latest Image Version via USB Boot Medium?

    Rate this article:
    100% helpful (1/1)

    This Article describes how to upgrade to the latest Image Version on a DIVAR IP 6000/7000 R2 via USB Boot Medium

    The latest suitable Image for your DIVAR IP R2 Family Device can be obtained from Bosch Central Technical Support Team. Please provide the SN (serial number) from the DIVAR IP 6000/7000 R2 when contacting Bosch Central Technical Support Team.


    Step-by-step guide

    1. Create the USB Boot medium

    • For this you need the ISO Image and an USB Medium Creator Tool like Rufus (
    • Create the USB Boot Medium like shown in the Picture (this can take up to 15 minutes)

      1.upgrade DIVAR IP 6000 7000 R2 to the latest Image Version via USB Boot Medium.png

    2. Plug-in the USB to the DIVAR IP and start/ restart the Unit

    • While starting, press F11 to go into the Boot device selection Screen
    • From there select the USB Stick as boot device

      2.upgrade DIVAR IP 6000 7000 R2 to the latest Image Version via USB Boot Medium.png

    • In the System Management Utility Screen select Option 2 System Recovery to update the OS

      3.upgrade DIVAR IP 6000 7000 R2 to the latest Image Version via USB Boot Medium.png

    3. After this process restart the DIVAR IP, unplug the USB and start Windows normally

    • The DIVAR IP might restart once due to first installation process


    • Please make sure you are NOT using Option 1 Initial Factory Default, because then you loose all the Data on the Storage
    • Please note that the OS will be reinstalled from the Image, you might need to install Windows updates and other Software again
    Version history
    Last update:
    ‎03-09-2023 03:59 PM
    Updated by:
    Who rated this article