Fire

Part Numbers D10024, D10024A, D9024 ,D8024, D326 ,D326A, D334 ,D334A, D339, D339A  

Part numbers D10024A, D10024, D9024, D8024

 Tecnical Bulletin D7053 Relay not Resetting after a Trigger FPD-7024 Firmware 1.00

Part Numbers B8512G, B9512G, D9412GV4, D7412GV4, D9412GV3, D7412GV3, D7212GV3, D9412GV2, D9124GV2, D7412GV2, D7212GV2, D9412G, D9124G, D7412G, D7212G

Part Numbers FPA-1000, FPA-1000-UL, FPA-1000-V2, FLM-325-IM, FLM-325-I24, FLM-325-I24-A, FLM-325A, FLM-325, FLM-325A-D,

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4,

Part Numbers D9068 (DACT Dialer), D9052 (Interface Module for Serial DACT Connect to the Morley Panel), D10024A, D10024, D9024, D8024 (Morley Fire Panels), D7033 and FMR-DACT-KEYPAD (Keypad Programmer for the D9068

Part numbers D8024, D9024, D10024, D10024A, D323A, D324A, D325A, D326A, D339A

Part numbers D7035, DS9432, D7053, MX465, DS9465,

Part Numbers - D7212B, D7212B1, D9112B, D9112B1

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4,  

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,RPS, RAMIv

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers D10024A, D10024, D9024, D8024, D328A

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

*New Feature - Summary Fire Relay Option - GV2 Firmware  7.05 An option is added that changes the duration of the Panel Wide Summary Fire Relay output. Select GV2AUX→MISCELLANEOUS→Fire Summary Sustain: Yes: Summary Fire Relay clears when all Fire Alarms are cleared from the display. No: Summary Fire Relay clears when the area FireAlarms are silenced and all area Fire Points return to normal. The default option is No. This feature provides a way to maintain the fire strobes active after the alarm bell outputs are silenced. Part numbersD7412GV2, D7412GV2, D9412GV2, D7212GV3, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

Part number D7024, FPD-7024, DS9400, DS9400I, DS9400M, D185, D7053

Part numbers Ds7400, DS7400X

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, DS7447, DS7445