Issue
What is the Battery Charging Voltage on a D8112 Control Communicator?
Solution
The float voltage for the Battery Charging Circuit on a D8112 is 13.9 VDC at a maximum current of 1.4 Amps. The actual current available can be found by deducting any continuous load from 1.4 Amps.
Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2
Issue
The D7036 keypad displays "INVALID PIN" every time a button is pressed.
Solution
You must add the PIN used by the D7036 to the panel, and assign an authority level:
Enter program mode by pressing [0] and then entering the programmer's PIN (the default programmer's PIN is 9876).
Press [2] to choose Security.
Press [1] to choose PINs.
Press [2] to choose User PINS.
Enter a user number that is not already in use, then press [#].
Enter [9436] for the PIN and then press [#].
Press [*] twice to return to the Security menu.
Press [2] to choose Authority.
Enter the same user number that you created in step 5.
Press [2] to choose Medium.
Press [*] three times to exit programming mode.
Issue
What is the Access Output on a DS7400XI?
Solution
Access Output: This is an output programmed to activate for 10 seconds when an access control PIN is entered at the keypad.
Note: Not UL listed for access control (UL294)