Fire

To silence all NAC's of one panel (FPA-5000/Avenar) from the map in FSM Step-by-step guide   Insert a sensor on the map of FSM Under sensor properties choose: General: Add symbol: FIRE_Panel_FPA_BG Settings: Driver Instance: the panel / compound where the FSM is belongs to Address-> e.g. Panel 1-10.1 ! Please pay attention: there are other “Panel” possibilities to choose. Please do not choose Panel 1-10 (Communication)! After inserting the settings click “ok” Then Apply At the map when you right click the panel symbol you will get the commands as shown below.   If there is a fire alarm, you can right click at the panel and then click at “silence on”. Please be sure, that then every NAC which is belonging to this panel is “silenced”. Additional: there is also a command "silence scope" which then has the effect, that the whole scope will be silenced.

This article presents step by step how to configure the “E-Mail Sender” function in FSM.

This article explain what should be done if new detectors are added to the system. 

This article answers the question:  What is the difference between "Actual status" and "Alarm status"?

This article explain how it is possible to automatically zoom in the map in case of alarm.

Check this article and find out what's new in FSM version 5.6.1

In FSM client select the "About" button in the upper right hand side, the About window opens and license info is displayed as shown in this article

Follow the steps from this article to see the labels from the sensors in FSM which are configured in RPS

Follow this step-by-step guide from this article and find out how to stop and restart the FSM Server service

This article explains if possible to install Fire monitoring system (FSM) in a virtual environment

Is always recommended to backup the database before running the default process. Find out in this article the steps to restore default FSM (Fire Monitoring System) configuration

This article indicates where you can find the log files for FSM client and for FSM server

The license key is not stored in plain text therefore is not possible to view, but the associated order number can be identified.

Check out this article and find out where are the FSM Alarm and Events logs stored and what is the size limit

If FSM needs to be connected to a new panel (network), then proceed as it is described in this article:

In cases where RPS configuration cannot be loaded please follow the instructions from this article.

Any related HW change in the FSM server will lead to license not being valid and will need to be transferred.

Do you want to move the license activated on existing computer/server to another computer/server (FSM - Fire Monitoring System)?

Learn from this article how to enable usage type Fire on KD55 element from Bosch Remote Programming Software (RPS)

This articles shows where can you restart the activation or delay period in FSP-5000-RPS if a new activation is triggered