Fire

The FAA-325-B6S is to be used with the FAP-325, FAI-325 and FAH-325 model sensors only. The FAA-325-B6S provides an audible alarm in the immediate vicinity. Typical applications are for use in hotels, apartments, and hospitals. It is compatible with the FPA-1000, FPA-1000-UL, and FPA-1000-V2.

Option Bus NAC Outputs (FPP-RNAC-8A-4C) will never be in sync with the NAC Output of the panel (FPA-1000, FPA-1000-UL, FPA-1000-V2, or FPD-7024).

Configuring the FPP-RNAC-8A-4C on an Option Bus Fire panels FPD-7024 & FPA-1000.

Part numbers D192C, D192G

Part numbers DS9400, DS9400I, DS9400M, D7024, DS9484, D7038

Issue Does the D7038 have built in Sync? Solution No, the Sync module is needed. The D7038 Input will pass the Sync Pulse to each Output.              Sync Module Part Numbers Brand Name                 Sync Module Part Number  System Sensor            MDL Wheelock                     DSM; SM Gentex                        AVS44; AVSM Note: If the DS9400 Series or D7024 Series panel is used with the D7038, NAC's 1 or 2 on the D7024 or DS9400 can provide a Wheelock Sync pulse. If the Eprom Revision is 2.04 or higher, either panel series can also provide a Gentex Sync Pulse from NAC 1 and or NAC 2. Part numbers DS9400, DS9400I, DS9400M , D7024, DS9484, D7038

Part numbers D7024, D7038

AVS-44, AVS-44R, AVSM

Part numbers D7038, D7024

Part numbers EVAX25, EVAX50, EVAX100, EVAX200, EVAX150,

Part numbers AVS-44, AVS-44R

Part numbers DS9484, D7038

Part numbers D7038, DS9484

Part numbers D192, D192C, D192G

Part numbers FPP-RNAC-8A-4C, D7038, DS9484, DS9400, DS9400I, DS9400M, D7024

Part Number D192C - Replacement is D192G

Part numbers DS9484, DS9400, DS9400I DS9400M, D7024, D7038

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9447, D7033, FMR-7033, FPP-RNAC-8A-4C, D7038, DS9484

Issue What could be the cause when adding four System Sensor Horn / Strobes to a Wheelock audio visual loop, and the horns are worrking fine but the strobes are not flashing correctly. Solution When installing Audio / Visual Appliances, all devices on the loop must be from the same manufacturer. Mixing System Sensor with Wheelock or Gentex or any combination may cause the Horns or the Strobes to work intermittently or not at all. This is because each manufacturer has their own Sync Pulse Protocol to run their notification devices.

Part numbers D9412GV4, D7412GV4, D9412GV3, D7412GV3, D7212GV3, D9412GV2, D9124GV2,D7412GV2, D7212GV2, D9412G, D9124G, D7412G, D7212G, D9412, D9124, D9112, D7412, D7212, D192C, D192G