Conference & Discussion

For some reasons it could be necessary that the the Technical Support needs this logging to analyze what could cause the trouble. This guide will help you to get through . This topic can as well be found in the Configuration Manual of Dicentis wireless page 34. DICENTIS_Configuration_Manual   Preconditions:   You need at least a user with access right: Configure Logging export is not available for tablets. The log file can only store about 1200 lines! That means you need to extract the logging after the error or symptoms occurred before the system overrides the logging line.  It may be to late if you extract the logging after some days.  

The DICENTIS Server has a own log file system which is working in the back ground and is called LogDump. If something went wrong during the operation it will be reported in there. In many times this is a good tool for error analysis as well as fault detection and will often requested by the Technical Support for pre-analysis. In the next Step-by-step guide it will be shown how to extract the LogDump file form DICENTIS Conference System.

In some cases the log file from the Dicentis Server become too big and it has to be cleared to reduce the size from time to time. The normal size is between 10MB and 50MB depending on the operation time but it should normally not grow over 100MB. If it does exceed, is most likely a fatal error within the DICENTIS system which produce a lot of logging each minute. It could be possible that the driver of the Network Card (3rd party Server) to become intermittent and the log file to grow to 300MB. In the next steps we will show you how to clear the logging.

DICENTIS installation log files are needed for further analysis for Technical support team if the software update failed or later some errors occurred. Below it is explained how you can extract DICENTIS installation log files.

If you are facing unknown problems with your DICENTIS wired system and you need advice from the technical support on that we will ask for log files and other information to start our analysis. For that reason this little program was created to make the extraction of all needed log files, system settings and other data more easily to extract. In future it is planed to integrate this in our software.