Fire

Follow this step-by-step guide and learn how you can use keypad programming to configure FPD-7024 IP communications

Check this article and find out what's new in FSM version 5.6.1

This article indicates where you can find the log files for FSM client and for FSM server

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, D7412G, D9124G, D9412G, D7412GV2, D9124GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G

To check Directx and graphics card capability you can use the dxdiag tool provided with Windows OS.

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400

Part numbers DS7400X, DS7400, DS7400Xi, DS7400XIVER2, DS7400XIVER3+, DS7400XIVER4+, D8125MUX, D7412G, D9412G, D7412GV2, D9412GV2, D7412GV3, D9412GV3, D7412GV4, D9412GV4, B8512G, B9512G, B600, B299, D8125, FPA-1000, FPA-1000-V2, FPE-7039, D7039, DS9431, FDP-7024, D7024, DS9400, DS9400I, DS8400M, D10024A, D10024, D9024, D8024, D7212B, D9112B, D7212B1, D9112B1, D7212, DS7430, DS7436,

The following steps describe an efficient way to update the panel firmware in an AVENAR panel 4.x network via SD card, thus keeping downtime of the panels to a minimum. To further reduce downtime, it is recommended to network the panel nodes via ETH.

Is the status displayed when Supervisory Usage type is selected in RPS - Bosch Fire Monitoring System?

This article provides a solution regarding the ringtone alarm which can be stopped in FSM. 

Library is offering 3 different sizes of detectors and can be customized. See this article and find out how you can customize Symbols (icons) - FSM

To silence all NAC's of one panel (FPA-5000/Avenar) from the map in FSM Step-by-step guide   Insert a sensor on the map of FSM Under sensor properties choose: General: Add symbol: FIRE_Panel_FPA_BG Settings: Driver Instance: the panel / compound where the FSM is belongs to Address-> e.g. Panel 1-10.1 ! Please pay attention: there are other “Panel” possibilities to choose. Please do not choose Panel 1-10 (Communication)! After inserting the settings click “ok” Then Apply At the map when you right click the panel symbol you will get the commands as shown below.   If there is a fire alarm, you can right click at the panel and then click at “silence on”. Please be sure, that then every NAC which is belonging to this panel is “silenced”. Additional: there is also a command "silence scope" which then has the effect, that the whole scope will be silenced.

The goal is to have a fully illuminated field of view for the installed AVIOTEC/s. Testing is required for every installation to make sure, that the area is illuminated correctly with full coverage and no reflections, aberrations or other. 

Follow this step-by-step guide from this article and find out how to stop and restart the FSM Server service

Any related HW change in the FSM server will lead to license not being valid and will need to be transferred.

Question   Do Bosch addressable smokes and smoke bases support CleanMe functions?   Answer   Currently the only Bosch smoke detector that supports CleanMe functions is the F220 series smoke heads when used with a conventional two-wire (F220-B6) base only and a CleanMe enabled control panel such as the D7024, and FPD-7024 conventional zones. Note:  The D7050, D7050TH does have a Chamber Check feature that will report dirty smoke if the head needs cleaning when used on the D7024, FPD-7024, DS9400m, DS9400, DS9400i.

Part numbers F220-P, D285, D263, D273, D273ES, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, F220, F220-PTH, F220-PTHC

Part numbers FPD-7024, FPE-7034, FPE-7039, D7039

Part numbers FPA-1000, FPA-1000UL, FPA-1000-V2

This article answers the question:  What is the difference between "Actual status" and "Alarm status"?