Fire

Can the installer code be returned to default in the FPD-7024, D7024, DS9400, DS9400I, DS9400M fire panels?  

How to configure the FPD-7024 to communicate by phone using keypad programming. How to use keypad programming to configure the FPD-7024 for phone communications.

How to use the DX4010V2 for connecting to the FPD-7024 with RPS. How to correct the FPD-7024 indicating Trouble Missing DX4020 or DX4010V2.  

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M,DS9431, D7039, FPE-7039

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M, DS9431, D7039, FPE-7039

Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M

How to upgrade the FPA-1000 from Version 1 to Version 2.

Part numbers FPD-7024, B426, B420, DX4020, B450, B440, B441, B442, B443, B444

How to interpret DBL when displayed on the FPD-7024 or D7024.

FPA-1000, FPA-1000UL, FPA-1000V2, Panel Grounding, Ground Fault

Part numbers D1005, DS250, MX250, D7050, D7050TH, D285, D7050DH, D263THS, D273, D273ES, DS260, DS282, DS282-CR, DS284, DS284-CR, DS284ES, DS250TH, DS250DH, DS282TH, DS282THS, DS282THC, DS284TH, DS284THS, DS284THR, DS284THSR, DS284THCS, DS284THC, DS284IS, DS284THES, MX250, MX250TH, D286, D263TH, D263THS, D263THC, D273THR, D273THSR, D273THC, D273THCS, D273THE, D273THS, D273TH, D273IS, MX250DH, MX280, MX280TH

Panel controller displays can become de-calibrated, e.g. upon initial power-up followed by unintentional contact with the display or inaccurately touching the crosshairs.  It becomes noticeable after the panel controller has re-booted and does not respond properly to touch.

In the controller history, you can see entry as detailed below, showing Detector -On- 14 , what does this indicate?

The table below shows the current FSM, FSI and MPC versions compatibility:  

FPA-1000, FPA-1000UL, FPA-1000V2, FMR-1000-RCMD, FRM-1000-RA

FPA-1000, FPA-1000-V2, FPE-1000-NE, FPE-1000-NF, FPE-1000-NW

This article provides instructions for troubleshooting Ground Fault in the FPD-7024 or D7024

This article gives answers to frequently asked questions regarding the AVIOTEC IP Starlight 8000 Video-based fire detection

Follow the steps from this article to configure FPD-7024 to communicate using Cellular or Ethernet network communications. How to configure the FPD-7024 for network communications using keypad programming.

Do you want to move the license activated on existing computer/server to another computer/server (FSM - Fire Monitoring System)?