Security: Access Control

How to reset an AMC2 controller

Possible solution for an erro message "invalid card format".

1.   Access the APE product page (below). Download and install APE into the new server/computer. https://commerce.boschsecurity.com/us/en/Access-Professional-Edition-3-8/p/68674539403/ 2.  Transfer the license from the old APE server to the new one. Technical Support requires a copy of the computer signature from both the old and new servers. 3.  Start the APE Configurator. 4.  Select Settings > License Activation (see figure 1). Figure 1 License Activation page. 5.  Capture a screenshot of the “Active license” page from both the old and new server computers. Email a copy of both screenshots to Technical.Support@us.bosch.com. The screenshot is recommended to ensure the Computer signature will be exactly as indicated on the page. 6.  Back up the database. Locate the tool “DbiTool”, located in the folder C:\BOSCH\Access Professional Edition\PE\bin. Open the tool and click the “Export all”  button (see figure 2). Figure 2  DbiTool page 7.  Manually back up the database and configuration folder. Locate the folder C:\BOSCH\Access Professional Edition\PE\Data (or locate the folder/path as modified during the initial install). Manually back up the “Data” folder. 8.  Import the configuration files and database to the new server computer. Manually paste the content of the “Export” folder contained within the previously backed up “Data” folder to the new server, in the same path: C:\BOSCH\Access Professional Edition\PE\Data\Export. The data folder also contains Formulas, Layouts and Pictures. Copy these items and add to the new server computer as needed. 9.  Use the APE configurator to import the configuration file. All Access PE configurations are stored in the folder “Data\Cfg”. The active configuration is called Active.acf.  Open the APE configurator, and click the   button. Choose the backed up Active.acf file. Activate the imported configuration using the   button. Propagate the active configuration to the controllers by pressing the   button. The dialog below appears. You can choose which configuration is sent to the controllers. Figure 3  Active Configuration page * Note: Before propagating the configuration to the controllers, make sure the old APE server is disconnected from the network. Import the database using the “DbiTool". Open the tool and click the “Import all” button. Note: The new APE server configuration will not be operational until the new license key is received from Technical Support and then added to the new APE server. 

How can the Door Opener be prevented from activating when the Request to Exit input is triggered?

Article describes how todisable APE video verification.

Article describes different types of ARD-RK40 readers

Article describes using elevator relays for other functions.

Set up Interlock APE 

How to set up Dual Factor Authentication (Card + Pin) APE

1. Open “Card personalization Configuration”. You can find this software by accessing the “Access Professional Edition” folder in the start menu. See figure 1. If unable to find in the start menu, this is located in the folder “C:\BOSCH\Access Professional Edition\CP\bin\SfmCfgApp.exe”, (unless non-default paths and folder names are chosen during installation). See figure 2.   Figure 1 Figure 2 *Note: Make sure to run the software with administrator rights.   2. In Card personalization Configuration go to the Print tab.   Figure 3   3. Create a print channel. Type the print channel desired name and click the button to the left.   Figure 4 Once the print channel is created, the installed printers at this PC will populate below.     Figure 6   4. The printer’s information will auto fill under the current channel, modify parameters as needed.   Figure 7   5. Once finished, click apply and close.   Figure 8   6. Restart the computer.

Why doesn't the Assign Card dialog box open when entering cardholders in Access Professional Personnel Management?

This article contains how-to series about data migration from Access Professional Edition (APE) to Access Management System (AMS).

Article describes what port is used for AMCIP utility.

How to configure Door shunt only APE 

Article lists compatible credentials for Lectus readers.

This article may be useful if migrating an Access Professional database to an AMS system

Issue APE logviewer repeatedly shows the message No. 542: “SQL-Server-Database online”, even when the SQL-Database is deactivated in the configurator.   Solution One possible solution would be the following: Manually modify the Active.acf file Before starting this process make sure the APE Configurator and Logviewer are closed. Create a backup of the Active.acf file. This file is located in the folder C:\BOSCH\Access Professional Edition\PE\Data\Cfg, (unless non-default paths and folder names are chosen during installation). Open the Active.acf file with a Notepad. Find the “sql server database” line and set activated to 0. “Activated=0” (see figure 1). Figure 1 Save the changes Restart BOSCH APE Service

Article relates to the AMC Mux device.

Article describes what "No Video Verification Active" means in APE.

Article lists the location of the APE video Player