Security: Access Control

Find out from this article how the Gmail account can be configured in Bosch Access Easy Controller (AEC) 2.1.9.5 

These are steps to assist with troubleshooting the AEC 2.1 time drifting.

  When logging to Access Management System (AMS), Visitor Management receive an error “Access Denied”.   Cause One possible cause is the user missing a “User profile”, or the User Profile doesn’t have execute rights for Visitor Management.   Solution One possible solution would be the following: Verify the user has a User Profile assigned. In AMS go to Configuration -> Operators and Workstations –> User rights Go to User Profiles, make sure to assign a profile if there is none.   Verify the Profile has execute rights for Visitor Management. Go to User Profiles, make sure the user profile assigned has provisioned the execution rights for Visitor Management. This rights may vary according to the user.   Note: The user and password to log in to Visitor Management are set under the “User account” tab.  

Disclaimer: this guide is intended for Windows advanced users. Knowledge on Windows registry and batch files is highly recommended. If you don’t have knowledge on modifying the Windows registry, do not continue as any mistake can damage the operating system.   Step-by-step guide   This document consists of three parts: Import or create a certificate to the RPS computer Enable Https and configure the certificate binding Import the certificate into AMS server  

Does the D6100 support a failover solution.

Article describes rdkypro "invalid badge, facility code and invalid card format" messages

Article describes "invalid badge, facility code and format" messages

This article will describe how to properly add onboard readers to an RkP-2220.

Article offers a possible solution for "free memory low" rdkypro message

Article describes different types of ARD-RK40 readers

Article describes whether barcodes can be used in rdkypro

Article describes rdkypro comm loss effects.

Article describes using elevator relays for other functions.

This article explains how to manually revoke a client's rights to run a Readykey Pro application.

Article gives possible reason for green and white rdkypro icon in Alarm Moinitoring

Article describes how to setup schedular for archiving and purging the database