What are the steps to start and end the phone session programming?
1. House Phone: Press the # key three times, and enter the passcode when prompted. Default ( 5432 )
2. Outside Phone: Dial the house phone number, and press * key three times when the call is answered, Enter a passcode when prompted
3. Installers Quick Connect: Connect a phone set to the control panel's test post. Press and hold the test button for approximately 15 seconds. Enter a passcode when prompted.
Note: To end the phone session, Press the # key repeatedly until the system says "goodbye".
How to correct the Easy Series panel cannot arm the control panel as Occupied.
With an interior point faulted, you cannot arm the control panel as Occupied. The control panel indicates that the point is not ready to arm, and that it will bypass the point.