Issue
The keypad displays the Access Module Door Point is in trouble. Diagnostics displays the point as missing.
Solution
T+ (Tamper Input) of the Access Module is an unsupervised input that is normal when open. Upon a short, the Door Point number assigned to the supervised zone of the Access Module is reported as a MISSING PT###.
The door controlled by the door control module doesn't remain released when the REX sensor configured as 'resettable' continues to detect motion.
B901, D9210C, D9210B,DS150I,DS151I,DS160, DS161
Describes how to setup when a valid token is presented at the reader, the alarm system should disarm, and when the door is closed the alarm system should rearm itself.
When a resistor is on one of the expansion points, it shows "shorted" in the view point status. When the resistor is removed, it shows "open" in the view point status. What should be done?
D9412,D7412,D7212,D9412G,D7412G,D7212G,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4,D7212B,D7212B1,D9112,D9112B,D9112B1,D8128D,D9127,D9210B
