Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Intrusion

    Sort by:
    ‎08-02-2018 08:35 PM
    Issue The D8112 panel is not sending signals when modem format is selected to the Central Station. Solution Only the D8112G2 can send signals in Modem II format with a CS setting of 7. The D8112E, D8112E1, D8112G, D8112G1 and D8112A must have CS set to either Blank or a selection between 1 and 6 but not 7. Only Modem Format can report a 4 digit account number to the Central Station all others only report a 3 digit account number.
    View full article
    ‎08-01-2018 10:46 PM
    Issue How many zones can be programmed on the D8112G2?   Solution   The D8112G2 is capable to have 8 master zones that may be expanded to 134 individual zones of protection.
    View full article
    ‎08-01-2018 10:46 PM
    Issue   How many codes can be programmed for the D8112G2?   Solution   The D8112G2 can be programmed with up to 70 individual combinations.
    View full article
    ‎08-01-2018 10:45 PM
    Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2
    View full article
    ‎08-01-2018 10:45 PM
    Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2
    View full article
    ‎08-01-2018 10:45 PM
      Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D192A, D192C
    View full article
    ‎08-01-2018 10:45 PM
    Issue What are the enviromental considerations for the proper operation of the Bosch control/communicators? Solution Indoor Dry.   Relative Humidity 5% to 85% noncondensing at +86 degrees Fahrenheit (+30 degrees Celsius). Operating temperature would be +32 degrees Fahrenheit to +120 degrees Fahrenheit ( 0 degrees Celsius to 49 degrees Celsius ).
    View full article
    ‎08-01-2018 10:44 PM
    Issue How many Logger Events can the D8112G2 store?   Solution   The D8112G2 Control Communicator can store up to 400 Events in the panel memory. The panel logs the time, date, event, master zone, and the primary or alternate phone number called for each event. The 400 events can be retrieved with the RAM II, RAM IV or RPS downloading software.
    View full article
    ‎08-01-2018 06:45 PM
    Issue How many Skeds can be programmed with the D8112G2 Control communicator?   Solution   The D8112G2 can be programmed with up to 64 skeds.
    View full article
    ‎07-31-2018 10:37 PM
    Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2, D8105E, D8105E1, D8105G, D8105G1, D8105G2, D8105A
    View full article
    ‎07-27-2018 07:34 PM
    Issue Why does the zone light on the D360 Command Center light when the D279A is disarmed? Solution The D8112 panel is programmed with a zone code of 3271 on a particular zone. The purple jumper on the D279A is cut. As a result, the D360 zone light illuminates when the D279A is disarmed. This is normal and will not impact the D8112 arming process.  If the D1252A is used, the disarm state of the D279A is not indicated.
    View full article
    ‎07-25-2018 07:21 PM
    Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2
    View full article
    ‎07-25-2018 04:55 PM
    Could not program a code of 1999 in panel combos.
    View full article
    ‎07-23-2018 06:48 PM
    How to correct the D8112/5505 not sending a Reboot report. The 8112/5505 panel is communicating alarm and trouble signals but after resetting the panel it does not report the reboot.  5505,D8112A,D8112E1,D8112G1,D8112G2
    View full article
    ‎07-16-2018 10:00 PM
    How to program a zone to activate Alternate Alarm. D8112G2,D8112E1,D8112G1,D8112A.
    View full article
    ‎07-16-2018 04:27 PM
      How to report a four digit account number with the D8112. D8112E,D8112E1,D8112G,D8112G1,D8112G1,D8112G2  
    View full article
    ‎07-13-2018 10:40 PM
    How to set configure the D8112 to pulse the bell output on a fire alarm. D8112A,D8112E,D8112E1,D8112G,D8112G1,D8112G2
    View full article
    ‎07-11-2018 06:50 PM
    How to control the D8112 buzz when test reports are sent. The D8112 panel buzzes when it sends test reports, how can I stop the buzz? D8112G2,D8112E1,D8112G1,D8112A
    View full article
    ‎07-11-2018 05:33 PM
    How to transmit a manual test report from the D4112, D6112 or D8112.
    View full article
    ‎07-11-2018 03:37 PM
    How to program the D8112 panel to report AC Restoral Reports. Central Station Receiving AC Fail Reports but not AC Restoral Reports. D8112E1,D8112G1,D8112A,D8112G2.
    View full article
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist