How to troubleshoot the panel only operating from Battery but not AC when a D928 is connected.
The panel is working but Command Centers read Service AC Fail. The A/C input voltage to the panel is correct but when the battery is removed the panel shuts down.
How to configure the D4412 or D6412 for Point Expansion using RPS.
1. Program the D4412 or D6412 for using point doubling.
2. Address the DX2010 for point groups.
3. Select the EOL to be used with point groups.
Issue
What handler is used to program the D2812 panel.
Solution
The D5200 2212 product handler supports the following panels: D2212, D2212B, D2212BE, D2412, D2412U, D2812, D2812U.
How to determine the max distance the DX3010 can be remote located from the control panel.
The maximum distance that the DX3010 can be remote located from the control panel is determined by whether or not an auxiliary power supply is used to power the DX3010.
How to determine the max distance the DX2010 can be remote located from the control panel.
This distance is determined by whether or not the DX2010 is supplying auxiliary power to devices. The DX2010 has the capacity to provide 12 VDC at up to 100 mA from the Aux Output terminals to power external devices such as motion detectors.
How to configure Door Control on both sides of a door with B8512G, B9512G or B6512 panels.
How to configure Door Control for Card-In and Card-Out with B8512G, B9512G or B6512 panels.
How to configure Access Control for Card-In / Card-Out with B8512G, B9512G or B6512 panels.
