Security: Access Control

Article describes what port is used for AMCIP utility.

Article describes how to configure door holiday schedules.

Article gives possible reason for green and white rdkypro icon in Alarm Moinitoring

This article explains how to use the tamper functionality of an AMC in BIS?

Article describes rdkypro comm loss effects.

Article describes AEC first card unlock feature.

Article describes whether barcodes can be used in rdkypro

This article explains how to toggle relay outputs just by double clicking on a floor plan symbol to control the lights in a certain part of a building.

Article describes how to configure AEC 1.0 "standard" 26 bit format

Article lists compatible credentials for Lectus readers.

The cardholder database or controller configuration is not loaded into the Access Easy remote controller. How is the information downloaded from the Access Easy Master controller?

How to configure Door shunt only APE 

This article describes how to eliminate the "Card number exceeded limit" error.

Most AEC firmware versions (2.1.7.10c V1 and earlier) are not compatible with Internet Explorer versions 8 and up.  This may prevent the Card Administration screen from displaying the cardholders. This is a workaround for that issue

ReadykeyPRO is changing some cardholder badges to Lost / Inactive / Returned status. What could be causing this?

Possible solution to rdkypro email messages

Describes which format to use for BOSCH 37 bit cards

Issue APE logviewer repeatedly shows the message No. 542: “SQL-Server-Database online”, even when the SQL-Database is deactivated in the configurator.   Solution One possible solution would be the following: Manually modify the Active.acf file Before starting this process make sure the APE Configurator and Logviewer are closed. Create a backup of the Active.acf file. This file is located in the folder C:\BOSCH\Access Professional Edition\PE\Data\Cfg, (unless non-default paths and folder names are chosen during installation). Open the Active.acf file with a Notepad. Find the “sql server database” line and set activated to 0. “Activated=0” (see figure 1). Figure 1 Save the changes Restart BOSCH APE Service

Describes the setup of elevator control for an AEC 1.0

Troubleshooting the rdkypro ethlan-micro