Security: Intrusion

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7212G, D7412G, D7412G, D9124G, D9412G, D7212GV2, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7212GV3, D7412GV3,D7412GV3, D9412GV3, D7212GV4, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G, D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U, D2812P, D6412, D4412, B3512, B4512, B5512, B6512

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U, D2812P

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U, D2812P

Issue If using the D220A on the D2112 do I have the Exit Feature? Solution No, the D2112 does not have the Exit Feature. It uses the "Step Out Feature". The Exit Feature does appear on page 23 of the Users Guide, but that is because this Keypad can also be used on other 2000 Series Panels which have the Exit Feature.

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U D2812P, D168A

Issue What is the open air range on the 2 button and 4 button ITI keyfobs?   Solution   The 60-607-319.5 two button and the 60-606-319.5 four button ITI keyfobs are 500 feet open air transmitters.

D5200 Programmer:  The D5200 needs to match a Data Lock code in the panel to access programming. Changing the panel Data Lock Code from the default of 12345 will prevent access. Remote Programming Software: RPS also needs to match the Data Lock code in the panel to access programming.  Changing the panel Data Lock Code from the default of 12345 will prevent access. RPS also needs to match the RPS Passcode (or RAM Passcode in legacy types) in order to allow access programming. Changing the default from 999999 will block RPS access.

How to interpret Alarm Recent Close reports from a 2000 series control panel. D2212,D2012,D2112,D2412,D2812

Part numbers D2212, D2212B, D2212BE, D2412, D2412U, D2412UE, D2812, D2812U D2812P

How to determine the Keypad Capacity of the D2112 control panel. D2112,D202A,D220A

When attempting to use the Excursion mode feature on a 2000 series panel, why does the keypad prompt the user to enter a passcode after pressing the Clear key? D2212,D2412,D2812  

Part numbers D2212, D2212B, D2212BE, D2412, D2812, D223, D223A, D222, D222A, D220, D220A, D202, D202A

Part number D2212, D2212B, D2212BE, D2412, D2812

How to  renew One Time Passcodes on 2000 series panels. D2212,D2412,D2812,D222A LCD,D223A LCD,D202A,D220A,D222,D223  

How to determine which pins of the RJ45 and RJ11 are used for Tip and Ring or Tip-House/Ring-House.

Can the D220A Keypad be used with a D2112? How to determine which resistor to cut from the D220A Keypad to work with a D2112 panel. D220A (8 led),D2112,D2412,D2812,D2212.

How to add a passcode on the 2000 Series panel using a Text Keypad. D2212, D222A LCD, D223A LCD, D222,D223, D2412,D2812

How to configure a keyswitch point on a 2000 Series panel. D2212, D2412, D2812

How to address LED keypads addressed to work with the D2212/D2412/D2812.

How to program the 2000 Series for expanded points and configure the B208 device address.