Security: Intrusion

How to change user name text using a D1260 keypad. Can the user name text be changed from the keypad on a 7000/9000 or G-series panel?

How to correct the D7090 not arming when [#] + [1] is pressed. DS7090,DS7090I,DS7090TM,DS7090TMI

How to determine which zones are indicated by the 8 LEDs on the D720 when more than 8 zones are in use.

How to clear alarm memory on the D720 keypad.

How to use the RF3341 Keypad on a D4412/D6412 Panel.

  DS7400XIVER3+,DS7400X,DS7400XIVER2,DS7400XIVER4+,DS7447,DS7447I,DS7445,DS7447E

Can the D220A Keypad be used with a D2112? How to determine which resistor to cut from the D220A Keypad to work with a D2112 panel. D220A (8 led),D2112,D2412,D2812,D2212.

How to add a passcode on the 2000 Series panel using a Text Keypad. D2212, D222A LCD, D223A LCD, D222,D223, D2412,D2812

How to correct when the keypad will not arm but displays Change of Relay. D1255,D1260,D7212GV2,D7412,D7412GV2,D7412G,D9412G,D9412GV2

How to view System Troubles on the DS7240/DS7220. DS7240,DS7220,DS7445I,DS7447I

How to address LED keypads addressed to work with the D2212/D2412/D2812.

How to correct the keypad displays "Entering" when powered up and then becomes "Keypad Locked". D6412,D4412,D623,D625,D623B

How to use CMD56 to add user codes to the D4412/D6412. When Using CMD56 to Add Codes, there is no prompt to Add Codes, Only Change Codes.

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7412G, D7412G, D9124G, D9412G, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7412GV3,D7412GV3, D9412GV3, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G, D1260

How to interpret a Battery Low report on the D4412/D6412. What battery voltage will the panel transmit a BATTERY LOW report?

How to view the panel log file using the DS7447 keypad. DS7400X,DS7400,DS7400Xi,DS7400XIVER3+,DS7400XIVER4+,DS7400XIVER2,DS7447I,DS7447E,DS7447

Issue Cannot access my menu items via the D1260 keypad, but know I the Menu Functions were enabled for the D1260 keypad within the panel program.   Solution   In programming CMD CNTR ASSIGMENT >  MENU KEY LOCK and set to NO. Verify in programming FUNCTION LIST that the functions the required functions are set to Yes for the correct keypad address. Compatible Control Panels • B9512G/B9512G-E • B8512G/B8512G-E • D9412GV4/D7412GV4/D7212GV41 • D9412GV3/D7412GV3/D7212GV31 • D9412GV2/D7412GV2/D7212GV21 • D9412G/D7412G/D7212G • D9412, D7412, D7212, and D9112 with firmware versions 6.40 or higher

Issue Can I change the user text on a 7000-9000 series panel via the keypad? Solution You may only change the users name via a keypad if you have a D1260 keypad.  Follow the steps below to make the changes. >Command 56 then Passcode >Choose the user number and press ENTER >Press the soft key menu item CONTINUE >Press the soft key menu item NAME >Follow the soft key menu to move left/right and to change the characters in the name. >After you done with the modifications press the soft key menu item CONTINUE >If this is correct you press the soft key menu item YES >If it is not correct then press the soft key menu item NO After you have completed your task press the soft key menu item EXIT D1260 Compatible Control Panels • B9512G/B9512G-E • B8512G/B8512G-E • D9412GV4/D7412GV4/D7212GV41 • D9412GV3/D7412GV3/D7212GV31 • D9412GV2/D7412GV2/D7212GV21 • D9412G/D7412G/D7212G • D9412, D7412, D7212, and D9112 with firmware versions 6.40 or higher

How to use the Enter Key Relay function in G series panels.

How to correct the D1260 error: Incorrect panel programming, enhanced should be set to yes.