Security: Intrusion

How to determine the max distance the DX3010 can be remote located from the control panel. The maximum distance that the DX3010 can be remote located from the control panel is determined by whether or not an auxiliary power supply is used to power the DX3010.

How to determine the max distance the DX2010 can be remote located from the control panel. This distance is determined by whether or not the DX2010 is supplying auxiliary power to devices. The DX2010 has the capacity to provide 12 VDC at up to 100 mA from the Aux Output terminals to power external devices such as motion detectors.

Related Products D8125 D9127

Related Products B426 Version

Related Products B3512 B4512 B5512 B930 D7212GV4 Ver2+ D7412GV4 Ver2+ D9412GV4 Ver2+

Article describes the D8229 limit for card data

Pinout for crossover cable

Describes using 2 readers on a D9210b or D9210c module.

The Remote Security Certificate Builder panel list is empty Related Products Remote Security Certificate Builder

This article describes the MAC addresses of the older network communication modules

How to test the back-up phone line on the panel every 24 hours with the Primary Path setup as Ip communications. D9112, DX4020, B420, B426

How to interpret the D8125Mux LED status and how to return the card to default. D8125 Mux, D5060

Creating a serial tunnel over the network to eliminate the need for long serial cables, or for connections to far for a serial cable to work.

How to program a transmitter into the EN4204/R Echo Stream Receiver.

How to force Remote Programming Software (RPS) to connect to the panel from a keypad. Remote Programming Software, Answer, 2000 series, D2212, D2412, D2812, D4412, D6412