Security: Access Control

1. Create a day model. Go to “System Data” and then “Calendar” Figure 1. Click on “Day Models” Figure 2. Click the “Create new” button Assign a name to the Day Model. Add a description and fill the intervals as needed In this example we are only creating one interval from 8 am to 5 pm. If needed, up to three intervals can be created in the same Day Model Click Save Figure 3. 2. Create a Time Model. Click “Time Models” Click the “Create new” button Assign a name to the Time Model. Add a description Select the number of days in the Period Select a reference date (select a past date and not a future date). Figure 4. Assign the Day Model to each day of the period as needed and click save Figure 5. Note: to verify the Time model is correct, click the preview button and confirm the dates match. The predefined holidays are shown below, assign the desired Day Model to apply on those days If holidays are not needed, click the “ignore special days” checkbox Figure 6.

Scenario User needs to keep a door open Monday – Friday from 8 am to 5 pm.   Solution Create a time model (schedule), and then configure the door to open in that schedule.   1. Create a day model. Go to “System Data” and then “Calendar” Figure 1. Click on “Day Models” Figure 2. Click the “Create new” button Assign a name to the Day Model. Add a description and fill the intervals as needed In this example we are only creating one interval from 8 am to 5 pm. If needed, up to three intervals can be created in the same Day Model Click Save Figure 3. 2. Create a Time Model. Click “Time Models” Click the “Create new” button Assign a name to the Time Model. Add a description Select the number of days in the Period Select a reference date (select a past date and not a future date). Figure 4. Assign the Day Model to each day of the period as needed and click save Figure 5. Note: to verify the Time model is correct, click the preview button and confirm the dates match. The predefined holidays are shown below, assign the desired Day Model to apply on those days If holidays are not needed, click the “ignore special days” checkbox Figure 6. 3. Configure the door to open depending on time model Go back to main menu and go to “Configuration” Click “Device Data” Figure 7. In the DevEdit, find the desired door. Figure 8. Click the “Options” tab and click under “Unlock door” Figure 9. Select the desired option, in this example we choose “Door is open depending on time model” Figure 10. Select the desired “Time model” Click the “Save” button. Figure 11.  

Article answers whether a Eight-bit Word Format Pin Readers works in rdkypro

Article describes how to resolve -1 error in rdkypro

Article explains why only doors 1-4 work on an AEC 1.0 system.

Article describes how to default the IP address of an AEC 1.0.

Article explains how to backup an AEC 1 or AEMC1/Allplex master database.

This article is one possible solution for "serial number out of range" in rdkypro.

How to connect to an AEC panel directly for a PC.

This articles assists in troubleshooting the issue of Expiration Date in Readkypro Not Operating

The Global I/O's are set up correctly, but will not work on the Readykey Pro system

Article has a possible solution to the display screen being distorted.

Indicates cable layout for RS485 devices in Rdkypro

This article has some of the rdkypro default passwords.

Possible solution for an erro message "invalid card format".

Scenario User needs to activate a relay when the door is held open, but they do not have an I/O board.   Solution Create an One Shot Advance I/O event to trigger the relay output desired. See below step by step how to do it.   Create a “Criteria” specifying the event we want to use to activate the relay output   Go to “Configuration” and then “Criteria”   Figure 1.   Click the “green plus” to create a new Criteria   Figure 2.   Under description assign a name In this example, the user only wants one door to trigger one relay, Click “Selected Devices Only”, select the desired door and add it to the “Selected Devices” column   Figure 3.   Click the “Events” tab   The user only wants the relay triggered by one specific event: “Door held open”. Click “Selected Events Only”. Add the desired event to the “List of Selected Events” column   Figure 4.   If this action is desired to happen only in one specific schedule, click the “Time” tab and choose the desired schedule. Click Save   Figure 5.   Create an Advanced IO to assign the Criteria for activating the relay output   Go to “Configuration”, and click “Advanced IO”   Figure 6.     Click the “green plus” to create a new one   Figure 7.   Under description assign a name for the new Advanced I/O The function needed is “One Shot” Select the output duration desired The “Input Control” is the criteria previously created. Click the edit button, select “Criteria” and the name assigned to the Criteria The “Output Link” is the relay output we want to activate. Click the edit button and select the relay output desired. Click the save button   Figure 8.

How to enable the comm server icon in the taskbar.

This article is a possible solution to rdkypro not logging offline events.

Changing the Essex D8229 site code.

This articles answers question if the 1320 inputs can be supervised.