Security: Access Control

Articles describes AEC time and Attendance

Article describes how to configure AEC 1.0 "standard" 26 bit format

Describes which format to use for BOSCH 37 bit cards

Article describes how to setup the reader for pin codes.

This article describes how to eliminate the "Card number exceeded limit" error.

The cardholder database or controller configuration is not loaded into the Access Easy remote controller. How is the information downloaded from the Access Easy Master controller?

Article lists compatible credentials for Lectus readers.

Article describes how to configure door holiday schedules.

Article describes how to change AEC door models

Question Why does Access Easy Controller load an error '4032 – Invalid File Name' when the Custom Logo is uploaded? Answer The custom logo file name is case sensitive. Programs such as Microsoft Paint will set the file extension of the graphic file to upper-case when setting the file name. The file name must have the file extension in lower-case. The exact requirements of the Custom Logo graphic file are below: The graphics file must be in GIF format. The file name of the graphic file name must be CustomLogo.gif (e.g. Take note of the file name, as it is case-sensitive). The file size should remain approximately 144x64 pixels. The file size can not exceed ten kilobytes.

Possible solutions to AEC video playback error

Possible solution to getting AEC "permission denied" error

Article states what IP address the AEC uses to search video.

Describes reasons for facility code error in AEC

Article addresses AEC Door Contacts and Request to Exits are not Responding

How to change number of events displayed in the AEC 1.0 or 2.1 transaction screen.

When logging into the AEC1.0 through your web browser, the message "you are a stranger" appears and you are unable to login to the system.

AEC 1.0 panel not booting

Describes the setup of elevator control for an AEC 1.0

Article explains why only doors 1-4 work on an AEC 1.0 system.