Security: Access Control

AEC doesn't show any transactions when a card is presented.

Article describes "invalid badge, facility code and format" messages

Article describes rdkypro "invalid badge, facility code and invalid card format" messages

This article will describe how to properly add onboard readers to an RkP-2220.

Article describes different types of ARD-RK40 readers

Article describes how to set 1320 reader voltages

Article describes how todisable APE video verification.

Article gives possible reason for "door already in use" AEC error message.

Elevator Day Mode allows you to remove the need for badging so that you can allow open access to certain floors of a facility during the time periods you specify. Day Mode is configured on a per-floor basis, so the floors that need to remain in a secure state, requiring badging, can do so.

Article describes ARD-AYCE65B and AEC compatibility.

Article describes AEC first card unlock feature.

Articles describes AEC time and Attendance

Article describes how to setup the reader for pin codes.

The cardholder database or controller configuration is not loaded into the Access Easy remote controller. How is the information downloaded from the Access Easy Master controller?

Article lists compatible credentials for Lectus readers.

Article describes how to configure door holiday schedules.

Article describes how to change AEC door models

Article describes how to address rkp-2220 onboard readers.

Describes the setup of elevator control for an AEC 1.0

Rdkypro reader communication loss possible solution