Security: Access Control

This article will describe how to properly add onboard readers to an RkP-2220.

Article describes rdkypro "invalid badge, facility code and invalid card format" messages

Possible solution for an erro message "invalid card format".

Article describes how todisable APE video verification.

AEC doesn't show any transactions when a card is presented.

Article describes "invalid badge, facility code and format" messages

Article describes different types of ARD-RK40 readers

Article describes how to set 1320 reader voltages

Article describes AEC first card unlock feature.

Article describes how to configure door holiday schedules.

The cardholder database or controller configuration is not loaded into the Access Easy remote controller. How is the information downloaded from the Access Easy Master controller?

Article lists compatible credentials for Lectus readers.

Describes the setup of elevator control for an AEC 1.0

ReadykeyPRO is changing some cardholder badges to Lost / Inactive / Returned status. What could be causing this?

How is the Duress Alarm event generated in the Access Easy Controller?

Article gives possible reason for "door already in use" AEC error message.

Articles describes AEC time and Attendance

Elevator Day Mode allows you to remove the need for badging so that you can allow open access to certain floors of a facility during the time periods you specify. Day Mode is configured on a per-floor basis, so the floors that need to remain in a secure state, requiring badging, can do so.

Article describes ARD-AYCE65B and AEC compatibility.

Article describes how to enable rdkypro times anti-passback