Security: Access Control

Article gives possible reason for "door already in use" AEC error message.

Article describes what a specific AEC sound means

Article describes troubleshooting encryption error in rdkypro

This article discusses how to resolve an issue with missing programming buttons.

A Device Type Mismatch error is showing in Alarm Monitoring.  This solution will provide steps that can be followed to resolve this error.

Elevator Day Mode allows you to remove the need for badging so that you can allow open access to certain floors of a facility during the time periods you specify. Day Mode is configured on a per-floor basis, so the floors that need to remain in a secure state, requiring badging, can do so.

Article describes configuring escort "check-in"

Article lists which wires are used in escort transponder from PC

Article relates to the AMC Mux device.

Article describes what "No Video Verification Active" means in APE.

Article lists the location of the APE video Player

Article describes how to delete APE event logs.

Article describes ARD-AYCE65B and AEC compatibility.

Article describes AEC first card unlock feature.

Article list a possible solution to the AEC 1.0 "you are a stranger" issue.

Article describes AEC spare relays

Article lists AEC and Allplex network ports.

Articles describes AEC time and Attendance

Article describes what port is used for AMCIP utility.

Article describes how to configure AEC 1.0 "standard" 26 bit format