Security: Access Control

This article will guide users on the process of adding a reader extension board to an AMC controller in AMS.

Article describes how to configure door holiday schedules.

Article describes rdkypro comm loss effects.

Article gives possible reason for green and white rdkypro icon in Alarm Moinitoring

This article explains how to use the tamper functionality of an AMC in BIS?

  When logging to Access Management System (AMS), Visitor Management receive an error “Access Denied”.   Cause One possible cause is the user missing a “User profile”, or the User Profile doesn’t have execute rights for Visitor Management.   Solution One possible solution would be the following: Verify the user has a User Profile assigned. In AMS go to Configuration -> Operators and Workstations –> User rights Go to User Profiles, make sure to assign a profile if there is none.   Verify the Profile has execute rights for Visitor Management. Go to User Profiles, make sure the user profile assigned has provisioned the execution rights for Visitor Management. This rights may vary according to the user.   Note: The user and password to log in to Visitor Management are set under the “User account” tab.  

Article describes AEC first card unlock feature.

Causes One thing that can cause the Identity Server error is the "certificates" not being updated during the installation process. This error can happen on the server or the client.   Solution For a possible resolution to the issue, follow the steps below: On the AMS server navigate to C:\Program Files (x86)\Bosch Sicherheitssysteme\Access Management System\Certificates folder. Right click on the AccessCertificateTool.exe and select "run as administrator".  The following should come up:   Click in the output folder section and another window should come up with "save as" option. Leave everything default and select the save option: Next select the "Generate" option. When it is completed you should see a screen similar to the one below. Select restart and then test visitor management on the server and/or the client again.

Article describes whether barcodes can be used in rdkypro

This article explains how to toggle relay outputs just by double clicking on a floor plan symbol to control the lights in a certain part of a building.

Beginning with BIS 4.9.1 we changed the COM standard security settings to the values shown in this article

Does the D6100 support a failover solution.

Article describes how to configure AEC 1.0 "standard" 26 bit format

The cardholder database or controller configuration is not loaded into the Access Easy remote controller. How is the information downloaded from the Access Easy Master controller?

Article lists compatible credentials for Lectus readers.

How to configure Door shunt only APE 

This article describes how to eliminate the "Card number exceeded limit" error.

Most AEC firmware versions (2.1.7.10c V1 and earlier) are not compatible with Internet Explorer versions 8 and up.  This may prevent the Card Administration screen from displaying the cardholders. This is a workaround for that issue

This article may be useful if migrating an Access Professional database to an AMS system