Security: Access Control

Describes which format to use for BOSCH 37 bit cards

How can I allow a cardholder to have more than one active badge in the system

Issue APE logviewer repeatedly shows the message No. 542: “SQL-Server-Database online”, even when the SQL-Database is deactivated in the configurator.   Solution One possible solution would be the following: Manually modify the Active.acf file Before starting this process make sure the APE Configurator and Logviewer are closed. Create a backup of the Active.acf file. This file is located in the folder C:\BOSCH\Access Professional Edition\PE\Data\Cfg, (unless non-default paths and folder names are chosen during installation). Open the Active.acf file with a Notepad. Find the “sql server database” line and set activated to 0. “Activated=0” (see figure 1). Figure 1 Save the changes Restart BOSCH APE Service

Troubleshooting the rdkypro ethlan-micro

Possible solution to error "create fail copyright" in escort.

Article describes how to default the IP address of an AEC 1.0.

This article could be useful for you in case of AMS_RPS integration issues

Article describes how to add a subscriber to security escort.

  Difference between the two different types of iClass keypad readers

Describes the setup of elevator control for an AEC 1.0

Possible solution to getting AEC "permission denied" error

  View Activity page on Access Easy Controller

Article describes troubleshooting encryption error in rdkypro

Article relates to the AMC Mux device.

Article describes how to configure rdkypro holidays

When adding doors in AMS, the software will by default, assign each door strike relay based on the first available unused output on the controller.

Article lists possible solutions to escort checksum error.

Article gives possible reason for "door already in use" AEC error message.

Describes what the LpsSearch service is for.