Status February 25, 2017
BOSCH offers and confirms that since February 2017 the firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. In case there are newer versions supported and recommended with BOSCH DIVAR IP this will be announced in cooperation with the Product Management.
For DIVAR IP units (e.g. DIVAR IP 6000) BOSCH BT Security & Safety Systems offers an firmware update for the internal MegaRADI Controller.
It could happen that in the Megaraid Software the user can see the following: potential non-optimal configuration due, PD commissioned as Emergency Spare error.
Here we provide the steps to update a DIVAR IP system:
Using MegaRAID Storage Manager utility under OS
1) Open MSM, Right click on Supermicro MegaRAID controller to be updated and click Update Controller Firmware
2) Click Browse to search for new firmware
3) Select the new MegaRAID controller firmware
4) Click OK to continue
5) Check the “Confirm” box and click OK to continue
*** Wait for around 1~2 minutes to complete
6) Click OK once firmware update completed
7) Reboot the system and check firmware version in controller OPROM banner during boot. At the section Revision you can see version 3.180.05-1562
😎 Check firmware version using MSM in OS When selecting the "Supermicro SMC 2208 (Bus1, Dev 0) device you can see on the right the "Firmware Version" = 3.180.05-1562
The firmware *.rom filw is available via the following link - inside the ZIP file:
This Firmware Version is subject of change. Any new version must be announce by BOSCH PRM responsible for DIVAR IP via the BT-ST/ETP-MKP2 organisation and BOSCH support at BT-ASA here in the BOSCH Knowledge Base.
... View more
The Software "VIDOS" or "VIDSO-NVR" with the replay tool "Archive Player for VIDOS" are all rather outdated former software developments of BOSCH ST.
We kindly request all our partners and customers in the need to get technical support on license transfers to get in contact with a local BOSCH team (e.g. Sales contact person). Level 2 Support / ASA organization can assist and help you to find a correct contact person as well, but a support ticket should and can no longer be created as license transfers are no longer offered for discontinued and outdated software.
Status of Aug 3, 2018
In many countries, the VIDOS Software went end of live 2011. With this announcement, we inform about the discontinuation of the software maintenance and license transfers. Please be aware of the EOL status (End of life). EOL was rolled out globally in June 30, 2011 with some exceptions in North America. December 31, 2012 and later it was no longer possible to purchase the software. End of 2015 License management was restricted. Due to many other changes (Operating system limitations and not state of the art security support), it is anyhow no longer possible to use those software. BOSCH does offer for a long time other software generations and we offer migration support from commercial side to find software today that can meet the needs in projects.
Since 2018-08-03, BOSCH Support can no longer offer license transfers for VIDOS and similar former Software packages.
Following Type Number and SAP Number is included:
For more details you can check with the Technical Support for video products at BOSCH in your region.
... View more
In this article we cover the following basic questions:
How to Factory Default a NetApp E-Seires unit by using BOSCH tools and NetApp WEB GUI?
How to download the NetApp Support Bundle of a reachable online NetApp Storage Array
How to Factory Default a NetApp E-Series that you bought via BOSCH sales channel? Using the BOSCH Configuraiton Manager 6.00 or 6.01 the NetApp models E2600, E2700 and E2800 can be managed. Especially we recommend to use the BOSCH Configuration Manager version 06.01 when using a NetApp E2800 to have all models (also former models E2700 and E2600) supported. Also in the BOSCH Configuraiton Manager 6.01 the Basic configuration for the initial setup is helpful as well as the Factoury Default option and Clear option is available. Of cours the NetApp E2800 offers also a WebGUI by using the IP of the management port of a controller. The following screenshot made from the BOSCH Conmfiguration Manager shows the options available in the tab "Basic Configuration" when a NetApp E-Series (DSA E-Series) is already added to a VRM system in the Configuraiton Manager. The Button "Defaults" is used to trigger the "Reset Storage Array" mechanism of NetApp. At a E2800 all configuration is eliminated but the Management Port IP still remains to ensure that the WEB GUI of NetApp and the communiction of the BOSCH Configuraiton Manager can still work.
How to download the NetApp Support Bundle of a reachable online NetApp Storage Array In the Tab "My Devices" of the Configuration Manager 6.01 and newer versions you can also now download the Support Bundle (collection of logfiles) from a NetApp E2800 stroage system. Select the NetApp E2800 in your device tree that is added to a VRM system and right-click on it. There you find "File Download" and "Maintenance Log..." - Choose that to download the NetApp Support Bundle.
... View more