I keep getting a Key Read error 71 on C-Soft or Network Recorder. Why and what can I do?
The PC has an issue with the drivers for the license dongle, reloading of drivers is required.
Please check to make sure the donlge USB or Paralell key is plugged into the pc.
Reboot the pc. Wait 2 minutes after logging into the pc and start the software program.
If you still get key read errors please follow the rest of the steps to properly install the driver.
You need to make sure that the dongle is unplugged.
uninstall all drivers in add/remove programs referred to as sentinel or safenet or SPNcombo.
Install the latest driver from the safenet website. http://www.safenet-inc.com/support/tech/sentinel.asp
Reboot computer again.
Now plug the dongle key back in.
Now download the key reader application and run it. This program should read the key and tell you how many lines it is programmed for. If this program finds the key then Csoft or Network Recorder should work for you. http://www.telex.com/us/dispatch/file?i=97440&lg=eng
What are the meanings of the DSP-223 terminal names?
The DSP-223 has several designations that define the audio paths that connect to it: Line RX Level is the audio signal "received" by the DSP-223 from the console, i.e. console transmit audio. Line TX Level is the RX radio audio sent to the console by the DSP-223. Radio RX Level is the RX audio signal coming into the DSP-223 from the radio receiver. Radio TX Level is the TX audio signal sent from the DSP-223 to the radio transmitter.