How to troubleshoot why the FA113 arm/disarm keyfob generates a RF Low Battery Response on the panel keypad.
How to troubleshoot the FA113 generating a RF Low Battery Response on the panel keypad.
When pressing both Star keys on the FA113 generates Servc RF Low Battery response on Command Center.
How to test the RF280THS wireless smoke used on the D4412 and D6412.
When testing the RF280THS by pressing the 'Test' button does not generate a panel alarm.
How to troubleshoot the panel only operating from Battery but not AC when a D928 is connected.
The panel is working but Command Centers read Service AC Fail. The A/C input voltage to the panel is correct but when the battery is removed the panel shuts down.
How to configure the D4412 or D6412 for Point Expansion using RPS.
1. Program the D4412 or D6412 for using point doubling.
2. Address the DX2010 for point groups.
3. Select the EOL to be used with point groups.
Describes how to setup when a valid token is presented at the reader, the alarm system should disarm, and when the door is closed the alarm system should rearm itself.
