Issue
Cannot access my menu items via the D1260 keypad, but know I the Menu Functions were enabled for the D1260 keypad within the panel program.
Solution
In programming
CMD CNTR ASSIGMENT > MENU KEY LOCK and set to NO.
Verify in programming FUNCTION LIST that the functions the required functions are set to Yes for the correct keypad address.
Compatible Control Panels • B9512G/B9512G-E • B8512G/B8512G-E • D9412GV4/D7412GV4/D7212GV41 • D9412GV3/D7412GV3/D7212GV31 • D9412GV2/D7412GV2/D7212GV21 • D9412G/D7412G/D7212G • D9412, D7412, D7212, and D9112 with firmware versions 6.40 or higher
How do you enable basic Openings and Closing reporting by user on the 7000/9000 series panel?
D9412,D7412,D7212,D9412G,D7412G,D7212G,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4
Program configuration of a DS7432 module on a D8125 Mux system
D9412,D7412,D7212,D9412G,D7412G,D7212G,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4,D8125 MUX
The fire alarm unlocked all access doors, but when the fire alarm was silenced and sensor's reset (CMD 47 was performed), the doors did not relock. How are the doors relocked? D9412G,D7412G,D9210B,D9412GV2,D7412GV2,D9412GV3,D7412GV3,D9412GV4,D7412GV4
How to program a shared area and sequence of operation of a shared area in conjunction with two associate areas.
D9412G,D7412G,D7212G,D7212,D7412,D9112,D9412G, D9412GV2,D9412GV3,D9412GV4,D7412GV2, D7412G, D7412GV3, D7412GV4, D7212G, D7212GV2,D7212GV3,D7212GV4
How long does a keypad message stay on the the keypad when it was sent from RPS or RAM IV Diagnostic Mode?
RPS,D7212,D7212B,D7212G,D7412,D9112,D9112B,D9412,RAMIV,D9412G,D7412G,D9112B1,D7212B1,D7412GV2,D7412GV3,D7412GV4,D7212GV2,D7212GV3,D7212GV4,D9412GV2,D9412GV3,D9412GV4
How can a SKED be disabled or changed from the keypad
D9412G,D7412G,D7212G,D1255,D1260,D7212,D7212B,D7212B1,D7412,D9112,D9112B,D9112B1,D9412D9412GV2,D9412GV3,D9412GV4,D7412GV2,D7412GV3,D7412GV4,D7212GV2,D7212GV3,D7212GV4
When using the internal contacts on a FA210W, which mode should be selected ?
D8125INV,D9412,D7412,D7212,D9412G,D7412G,D7212G,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4,FA400
