Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Intrusion

    Sort by:
    ‎06-17-2018 09:05 PM
    Issue Cannot access my menu items via the D1260 keypad, but know I the Menu Functions were enabled for the D1260 keypad within the panel program.   Solution   In programming CMD CNTR ASSIGMENT >  MENU KEY LOCK and set to NO. Verify in programming FUNCTION LIST that the functions the required functions are set to Yes for the correct keypad address. Compatible Control Panels • B9512G/B9512G-E • B8512G/B8512G-E • D9412GV4/D7412GV4/D7212GV41 • D9412GV3/D7412GV3/D7212GV31 • D9412GV2/D7412GV2/D7212GV21 • D9412G/D7412G/D7212G • D9412, D7412, D7212, and D9112 with firmware versions 6.40 or higher
    View full article
    ‎07-25-2018 04:00 PM
    Overview: User is entering passcode twice to arm alarm system. A five second delay between key strokes will cause the keypad to view the next entry as the start of a NEW passcode. Key strokes must be strung together with no pauses in between longer that 5 seconds. Issue User must enter passcode twice to arm the system.  Same code is used for both entries.   Solution   The user is pausing too long between key strokes.  After a key is pressed the next key stroke must be pressed wthin 5 seconds. A delay of 5 or more seconds will cause the keypad to view the next key stroke as the start of a new entry.
    View full article
    ‎06-15-2018 09:47 PM
    How to use the Enter Key Relay function in G series panels.
    View full article
    ‎06-12-2018 09:51 PM
    How can a SKED be disabled or changed from the keypad D9412G,D7412G,D7212G,D1255,D1260,D7212,D7212B,D7212B1,D7412,D9112,D9112B,D9112B1,D9412D9412GV2,D9412GV3,D9412GV4,D7412GV2,D7412GV3,D7412GV4,D7212GV2,D7212GV3,D7212GV4
    View full article
    ‎06-28-2018 05:26 PM
    How to add the security company phone number to display on the D1260 Enhanced Command Center.
    View full article
    ‎05-17-2018 04:47 PM
    How to receive a program from a D636 keypad. D6112,D636A,D5200
    View full article
    ‎07-17-2018 04:28 PM
    How to disarm All areas authorized by the user at once.
    View full article
    ‎05-18-2018 08:19 PM
    What does a zone flashing on the D621 LED keypad mean ? D6412,D4412,D621
    View full article
    ‎05-16-2018 09:25 PM
    When adding zones, they do not display when faulted on the keypad. D2412,D2012,D2112,D2812,D2212, D202, D202A, D220
    View full article
    ‎07-17-2018 06:24 PM
    How to enable/disabling encoding tones on the D1254 Keypad used wth the D7112.
    View full article
    ‎05-31-2018 08:36 PM
    How to control the D4412 or D6412 Keypad Backlighting.
    View full article
    ‎07-17-2018 02:50 PM
      How to perform Zone Test from a Master Keypad on the DS7400 Series. DS7400,DS7400X,DS7400Xi,DS7400Xi (Ver 3+),DS7400Xi (Ver 4+)  
    View full article
    ‎06-29-2018 06:04 PM
    How to View the Event Log using the 540 command center with Honeywell 5800/5900 Series Panels. D540,5800B,5800B1,5900B1,5900B,5800C,5900C,5900G,5800G.
    View full article
    ‎05-16-2018 09:24 PM
    Keypad says "NOT PROGRAMMED SEE INSTALLERS MANUAL" D6412,D4412,D623,D625
    View full article
    ‎05-17-2018 01:51 PM
    Replacing a D2112 with a D2212 and the keypads do not work D2112,D2212, D202, D202A, D220
    View full article
    ‎06-15-2018 06:29 PM
    How to return the DS7140 keypad and all Alpha programming to factory default.
    View full article
    ‎06-15-2018 09:34 PM
    How to determine the maximum wire distance for the DS7091. DS7090,DS7090TM,DS7091
    View full article
    ‎05-24-2018 04:12 PM
    How many keypads can be installed on a DS7400XI V4 control panel? DS7447I,DS7400XIVER4+,DS7445
    View full article
    ‎05-24-2018 04:09 PM
    How do you enable the A, B, & C keys on keypad? D2212,D2112,D2412,D2812,D202,D202A,D220,D222,D223
    View full article
    ‎07-17-2018 04:30 PM
    How to disarm selected areas from a keypad with scope in multiple areas.
    View full article
    Top Contributors