Security: Intrusion

How can the command center be cleared after an alarm condition on the 7000/9000 series panels?  D7412G,D9412G,D9412,D7412,D7212,D7212G,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4,D1255,D1260

How do you change a code on the 9000/7000 series? D7412G,D9412G,D9412,D7412G,D7412,D7212,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D7412GV4,D9412GV4,D7212GV4

The keypad is giving a trouble tone after a CMD 47 is entered to reset the smoke detectors. D7412G,D9412G,D7212,D7212B,D7212B1,D7212G,D7412,D9112,D9112B,D9112B1,D9412,D1255,D1260,D720,D7412GV2,D9412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4,B9512G,B8512G,B920,B930,B942

The fire alarm unlocked all access doors, but when the fire alarm was silenced and sensor's reset (CMD 47 was performed), the doors did not relock. How are the doors relocked? D9412G,D7412G,D9210B,D9412GV2,D7412GV2,D9412GV3,D7412GV3,D9412GV4,D7412GV4

What steps are requred to enable a 7000/9000/G series or B version panel to send test reports to the Central Station? D9412G, 5800B, 5800B1, 5900B1, 5900B, 5800C, 5900C, 5900G, 5800G, 5900B, D7412G, D7212, D7212B, D7212B1, D7212G, D7412, D9112, D9112B, D9112B1, D9412,D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4

How is the ground fault feature on the 7000/9000 "G" series panels enabled? D7412G,D9412G,D7212G,D9412GV2.D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4