Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Intrusion

    Sort by:
    ‎05-31-2018 06:48 PM
    How to determine compatibility and address the B420 or B426 IP Communicator.
    View full article
    ‎05-31-2018 04:17 PM
    How to determine the max distance the DX3010 can be remote located from the control panel. The maximum distance that the DX3010 can be remote located from the control panel is determined by whether or not an auxiliary power supply is used to power the DX3010.
    View full article
    ‎05-31-2018 03:44 PM
    How to determine the max distance the DX2010 can be remote located from the control panel. This distance is determined by whether or not the DX2010 is supplying auxiliary power to devices. The DX2010 has the capacity to provide 12 VDC at up to 100 mA from the Aux Output terminals to power external devices such as motion detectors.
    View full article
    ‎05-25-2018 07:50 PM
    How to interpret the D8125Mux LED status and how to return the card to default. D8125 Mux, D5060
    View full article
    ‎05-24-2018 09:46 PM
    How to address the DX3010 for different off board realys.
    View full article
    ‎05-24-2018 04:12 PM
    What are the wire requirements for the zonex bus? D9412G,D9124,D7412G,D7212,D7212B,D7212B1,D7212G,D7412,D8112G1,D8112G2,D9112,D9112B,D9112B1,D9412,D9127T,D9127U,5800B,5800B1,5900B1,5800C,5900C,5900G,5505,D8125,D8126,D8127,5800G,5900B,                                                                                                                                     D9412GV2,D7412GV2,D7212GV2,D9412GV3,D7412GV3,D7212GV3,D9412GV4,D7412GV4,D7212GV4
    View full article
    ‎05-23-2018 09:51 PM
    What are the new part numbers for the D9529 Octal Relay and the D9528 Eight Input device? D6412,D4412,DX2010,DX3010
    View full article
    ‎05-23-2018 08:41 PM
    How to change Legacy Mode in the IP Communicator. Legacy Panel Mode cannot be changed with the B426 or B420 addressed to 0.
    View full article
    ‎05-22-2018 03:54 PM
    How to address and where to connect the DX4010V2 or DX4010i.
    View full article
    ‎05-22-2018 03:43 PM
    How to configure the D4412 or D6412 for Point Expansion using Keypad Programming.
    View full article
    ‎05-22-2018 03:41 PM
    How to use the D9210B & D9210C on the same panel.
    View full article
    ‎05-22-2018 03:38 PM
    How to   Program network reporting in a 9000 or G Series control panel.
    View full article
    ‎05-21-2018 09:30 PM
    How to Program network reporting in a GV2 Series control panel.
    View full article
    ‎05-21-2018 08:15 PM
    Program network reporting in a GV2 Series control panel
    View full article
    ‎05-21-2018 08:04 PM
    How to restore the B42x card back to default values?
    View full article
    ‎05-21-2018 08:02 PM
    How to determine which B942 credentials will also work G series access doors?
    View full article
    ‎05-17-2018 09:13 PM
    How to correct when The ‘Unlock Door’ sked does not unlock the Access Door.
    View full article
    ‎05-17-2018 09:08 PM
    How to perform Bell Test on the GV4 Version 1.xx when using B308 relays.
    View full article
    ‎05-17-2018 04:45 PM
    How do I send a supervisory using the D185 when both of the onboard relays have been used on the D7024 panel? D7024,D185,D7053
    View full article
    ‎05-17-2018 04:41 PM
    What is the part number for the Mux relay module? D7024,DS9400M,D8125MUX,MX465,DS9400i,D9124,D7053,D9412,D9412G,D7412,D7412G,D9112,D9112B,D9112B1,D7212,D7212B,D7212B1,DS7465,DS7465i
    View full article
    Top Contributors