Security: Access Control

This guide would be useful if a relay needs to be triggered from an access event to a external system. Ex: to sound a siren, turn on an LED, trigger another external relay, etc.

Check this article and find out if it is possible to connect AMC IP controllers together via RS485

This article can help with adding maps to a Security Escort system.

See the 3 different part numbers of a Security Escort USB dongle, depending on what license you currently have or want to obtain.

This article will guide users on the process of adding a reader extension board to an AMC controller in AMS.

Very often, it is easier to troubleshoot most AMS problems when logging is enabled. By default, this option is disabled in AMS. These steps will detail how to enable logging for AMS. Step-by-step guide  Log into the AMS server or client with administrative privileges 2     Click on the “Configuration” option\ 3     Next select the “Options” selection 4     Select the “Debug logfiles” option 5     Now check the “DMS, Terminal and MAC name” under the (Technicians) column. Leave the options under the (Support) column Unchecked unless specifically directed to. 6     In order for the logs to be available, the AMS server PC will need to be rebooted 7     After the AMS server is rebooted, reproduce the issue and it should now be listed in the log files for engineering to evaluate.    The log files are typically located in the C:\ProgramData\Bosch\Sicherheitssysteme\Access Management System\Logs

This article explains the integration of B/G intrusion panels in AMS.   The integration of B/G intrusion panels AMS requires the installation of the intrusion RPS API version V2.1.25920 or later only applies to AMS 3.01 version of AMS and for version 3.0 the API version is V2.1.25454, also the earlier AMS 3.0 version RPS cannot be installed on the same PC. For small installations it is possible to install AMS and RPS on the same computer, with the following prerequisites: • AMS has never been installed on that computer • SQL Server database has never been installed on that computer • You install RPS before AMS The RPS API must be installed on the same computer as the RPS tool. The RPS tool is needed to configure and manage the communication with the B/G panels. The RPS API conveys communications from AMS to the RPS tool, which then communicates with the panels. SDK communication to the B/G panels is integrated in AMS. No separate installation is required, but Mode2 and a Automation Pass-code must be enabled on the panel   Step-by-step guide   1. Install the RPS API on the RPS Computer 2. Make sure that these processes are running on the RPS PC 3. Set the Automation Device and change the default password. While you are in RPS, also set the date and time of the intrusion panel. After you finished the work in RPS, load the configuration to the panel and disconnect the RPS from it. 4. AMS > Configuration > Panels > RPS API configuration menu Set-up the connection parameters to connect AMS to RPS API "rpspc" is the name of the PC on which RPS and RPS API are running User name to login to RPS - Default: Admin Password to login to RPS - Default: 1111 Press to test the connection Test is successful: 5. AMS > Configuration > Panels > Panel administration menu Define: To which division of AMS the intrusion panel shall belong to Whether you want the panel users managed from AMS (Under administration) Whether you want the panel to be the part of MapView The access data to the panel 6. AMS > Configuration > Panels > Panel administration menu Define the access data to the panel Use the password you defined in RPS for the Automation Mode 2 Device connection 7. AMS > System data > Authorization profiles for panels menu: Create authorization profiles and assign area(s) of panel(s) to it. Define to which user group of the intrusion panel will be this Authorization profile assigned 8. AMS > Personnel data > Card menu, Intrusion tab: If the selected Cardholder is planned to be a Intrusion panel user as well, then select the checkbox and define the necessary data. Only the Pass-code the Language are mandatory, the rest can be left blank 9. It is manddatory that the date and time settings are properly set at the intrusion panel and synchronized with AMS Server 10. Until the RPS is connected to the intrusion panel, AMS cannot synchroniza with the panel.

When attempting to run the AECT utility to check PC specs, there may occur a situation where it doesn't run at all when selecting run as administrator or just double clicking on it to open it. Typically nothing will appear or possibly a text file may appear like the one in the screenshot from this article.

This article may be useful for individuals that have a problem applying licenses in AMS 5

Alert Units are separate boards that contain 2 wet relay outputs that can be used to attach a "strobe" or a horn "siren" to trigger in the event of an alarm condition. This article will describe how to add an Alert Unit to the Security Escort software.

In the context of Bosch AMS (Access Management System), a "man-trap" refers to a security feature used to control access to a restricted area. This setup helps prevent unauthorized individuals from entering a secure area by trapping them between the doors until their identity and authorization can be verified.

Once an elevator door model is used on an AMC controller in AMS, no other door models can be added to that controller.

This article could be useful for you in case of AMS_RPS integration issues

This article contains how-to series about data migration from Access Professional Edition (APE) to Access Management System (AMS).

This article may be useful if migrating an Access Professional database to an AMS system

This article explains in a step by step guide how can you setup pincodes to work in AMS 4.0

When upgrading from a version 2.xx escort to a version 3.xx, one of the steps is to backup and restore a transponder.xml file.

This article contains the part numbers for the Security Escort licenses 

This article describes the use of the AECT utility within the AMS installation folder, that will check your PC specs to see if AMS can be installed. This is only a "guide" as to the recommended specs for installing AMS.

When trying to access the Access Easy Controller via Microsoft Edge, Chrome or other web browsers, you may get an error, "the connection for this site is not secure", which prevents you from connecting to the AEC.