Security: Intrusion

  How to troubleshoot missing D8125 Mux devices. What happens if the Multiplex device Tamper switch is faulted? DS7465i,DS7460i,DS7461i,D8125MUX.  

How to correct point and user numbers reporting in a non-standard format, example; points 1-9 reporting as 101-109 or users 006-013 reporting as 601-608.

How To enable the B426 LED's when there is no LED activity during normal operation.

The reader sounds a constant tone and is wired correctly.

How to determine Popit Compatablity with the panel type. D9112B1, D9112, D9127T, D9127U, D9127, D8126T, D8126U, D8126, D8127T, D8127U, D8127

Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7212G, D7412G, D9124G, D9412G, D7212GV2, D7412GV2, D9124GV2, D9412GV2, D7212GV3, D7412GV3, D9412GV3, D7212GV4, D7412GV4, D9412GV4, B8512G, B9512G

How to interpret SERVC COMM FAIL displayed on Command Center. D7212B, D7212B1, D9112B, D1255

How to correct the Panel reporting 'Service Phone Line' when programmed as Local.

Issue What voltage and current is the phone line monitor measuring to sense trouble on the phone line on the D7212B/D9112B panels?   Solution   The phone line monitor senses trouble when the voltage on the line falls below 4.5 to 7.5 VDC, or in the off-hook condition when the current is 8 to 13mA.

How to interpret the 'Check Device' display on a D1255 or D1260 keypad. Why does the keypad display "Check Device"? How to locate which point generated the 'Check Device' display and modify programming to prevent the display.

Issue How is the history reset after an event overflow message?   Solution   Receive the panel's history, choose the set pointer option to have panel start history from that point forward on newer just receiver Current.   Part numbers D7212B, D9112B, D7212B1, D9112B1, D7212, D7412, D9112, D9124, D9412, D7212G, D7412G, D7412G, D9124G, D9412G, D7212GV2, D7412GV2, D7412GV2, D9124GV2, D9412GV2, D7212GV3, D7412GV3,D7412GV3, D9412GV3, D7212GV4, D7412GV4, D7412GV4, D9412GV4, B8512G, B9512G

How to program 7000/9000 thru GV3 panels to work with the D8125INV and Inovonics wireless points.

The door controlled by the door control module doesn't remain released when the REX sensor configured as 'resettable' continues to detect motion.  B901, D9210C, D9210B,DS150I,DS151I,DS160, DS161

How to view the panel type and firmware revision.

How to Passcode Protect RPS Connection to the panel.

How to transmit opening/closing reports when arming individual areas.