How to correct the D1255 Command Center going blank while selecting menus.
While entering key stroke commands and using the Menu option on the D1255, the display blanks out and the speaker crackles then the display comes up after 5 seconds.
How to correct custom functions that execute when A, B or C keys are pressed on the D720.
D1256 Command Center functions are Executing when A, B or C Keys on a D720 are pressed.
How to program a shared area and sequence of operation of a shared area in conjunction with two associate areas.
D9412G,D7412G,D7212G,D7212,D7412,D9112,D9412G, D9412GV2,D9412GV3,D9412GV4,D7412GV2, D7412G, D7412GV3, D7412GV4, D7212G, D7212GV2,D7212GV3,D7212GV4
I am able to arm the area with a 24 hour point violated in the same area. How can I prevent the area from being armed with a 24 Hour point violated?
24hour points do affect the 'ready to arm' status of the area, therefore will not prevent the ability to arm after clearing the alarm while the 24hour point remains faulted.
Program the 24 Hour Point as a Type 1, Response 9. When using point response 9, the point will operate as a 24hour point. However because this will become a controlled point it will prevent arming until either satisfied or bypassed (if the point is configured as bypassible).
How can a SKED be disabled or changed from the keypad
D9412G,D7412G,D7212G,D1255,D1260,D7212,D7212B,D7212B1,D7412,D9112,D9112B,D9112B1,D9412D9412GV2,D9412GV3,D9412GV4,D7412GV2,D7412GV3,D7412GV4,D7212GV2,D7212GV3,D7212GV4
