Conference & Discussion

Downloading firmware over the serial cable can be tricky, this document gives further information on the required equipment and settings for the serial connection and the system.

Click the Licensing button to open the Licensing page. Licensing is only required when you purchase software licenses. The Licensing page provides you with an overview of the activated licenses. Activate a license: To activate software you need to have an activation ID which was send by email after purchasing the software license. Activation requires a USB memory stick and any PC connected to the internet. Note 1: License activation is not supported for tablets. Note 2: While the same licenses are used by Dicentis Wired, the process to activate them on the Dicentis Wireless system are different, so please follow the below steps to activate the licenses on Dicentis Wireless. Insert the USB memory stick into the PC connected to the Wireless Access Point (DCNM‑WAP). Click the Add license button. Enter all required Customer information and Activation ID, click the Add license button and then the Activate button. Note: You can add more than one Activation ID. When all activation IDs are added, click the Activate button. A “save as“ dialog is shown. Save the “request file“ to your USB memory stick.  Go to the website https://licensing.boschsecurity.com using a PC/Laptop which is connected to the internet, and login. If you do not have a username, contact your local Bosch representative to acquire an account. Go to “manage license” and upload the “request file” from the USB memory stick. Save the “response file“ to your USB memory stick. In the DICENTIS web browser interface application, click the  Process response message button. Select the correct response file from the USB memory stick, and then click “Open”. Now the license is activated. New functionality is added and can be used by the system.

To use the software modules, the software needs to be licensed. In order to receive licenses for the software, the keys need to be registered online.

Time and date are set manually on the WAP. Once a month, the time needs to be set again as time drifts over time.

System setup with multiple cameras and a supported multiviewer: Orange: Ethernet connections, red: audio or video connections, blue: HD-SDI Follow the manuals for the multi-viewers. They can be found at their manufacturer’s websites: TvOne Corio Matrix Mini User Manual Kramer MV 6 User Manual Make sure that to get this setup to work, both the multi-viewer and the CCS1000D Control Unit should be in the same VLAN/subnet. Also, use the correct port to connect to the multiviewer: TvOne Corio Matrix Mini; port 10001, example: http://192.168.1.2:100001 Kramer MV 6; port 5000, example: http://192.168.1.2:5000

If the document with the license key for DCN-NG was lost, there is still a way to find the license key currently loaded in a DCN-CCU2, this article shows how.

When using a fixed IP addresses in a multi-subnet Dicentis system, certain settings need to be made for the system to function well. If the settings are not made correctly, the system can stop functioning & disconnect from the server.

In order to integrate 3 rd party software with the DCN-NG system, there are 3 different integration options: Open Interface (OI) Application Programming Interface (API) Streaming Meeting Data (SMD)

DCN-NG Database Backup Note the name of the database files that need to be backed up. To check what those files are called, open the “Bosch DCN Conference Software Server Console” from the Windows notification area and note the name of the active database. Shut down all DCN-NG-related programs like ‘DCN-SW Operator Application’ and ‘DCN-SW Configuration Application’. Stop the DCN-NG service; Press the Windows button and search for ‘Services’ Open the Windows Services window Select the service called ‘DCN-SW Server (DCNNG) Right click and choose ‘Stop’. Still in the Services window, stop the services ‘SQL Server (SQLEXPRESS)’ and ‘SQL Server VSS Writer’ in the same way as outlined above. Open the folder that contains the DCN-NG database. On Windows 7 and 10, it’s located by default at “C:\Program Files\Microsoft SQL Server\[MS SQL Express version]\MSSQL\data”. Replace the line between [] with the right name, this can change. Right now it’s ‘MSSQL10_50.SQLEXPRESS’ Make sure that the user that is logged in is able to read/write from/to this folder. If this is not the case, the following step will not work. It’s possible to change permissions to folders for users within Windows, but that’s outside the scope of this document. Logging in to the server with an administrator account should be sufficient. Copy the right files to a safe location – make sure to copy both the file with extension ‘mdf’ as well as with the extension ‘ldf’.   DCN-NG Database Recovery Short version: simply follow the backup steps, but copy the files back to the database folder. Shut down all DCN-NG-related programs like ‘DCN-SW Operator Application’ and ‘DCN-SW Configuration Application’. Stop the DCN-NG service; Press the Windows button and search for ‘Services’ Open the Windows Services window Select the service called ‘DCN-SW Server (DCNNG)’ Right-click and choose ‘Stop’. Still in the Services window, stop the services ‘SQL Server (SQLEXPRESS)’ and ‘SQL Server VSS Writer’ in the same way as outlined above. Open the folder that contains the DCN-NG database. On Windows 7 and 10, it’s located by default at “C:\Program Files\Microsoft SQL Server\[MS SQL Express version]\MSSQL\data”. Replace the line between [] with the right name, this can change. Right now it’s ‘MSSQL10_50.SQLEXPRESS’ Make sure that the user that is logged in is able to read/write from/to this folder. If this is not the case, the following step will not work. It’s possible to change permissions to folders for users within Windows, but that’s outside the scope of this document. Logging in to the server with an administrator account should be sufficient. Copy the right files back to the database folder  – make sure to copy both the file with extension ‘mdf’ as well as with the extension ‘ldf’. Start all services once more; ‘DCN-SW Server (DCNNG)’, ‘SQL Server (SQLEXPRESS)’ and ‘SQL Server VSS Writer’. Run the ‘Repair’ function from the DCN-SW installation package. The Repair Wizard will run through the procedure of creating a new database or selecting an already existing one. Choose the existing database; If the repair process is successful, the following window will be shown: The “Bosch DCN Conference Software Server Console” from the Windows notification area will show the system is running correctly: