Is the EN1212 compatible with G or B series panels? ISW-D8125CW-V2, D9412GV4, EN4200,B820,B3512, B4512, B5512, D7212G, D7412G, D9412G, D7212GV2, D7412GV2, D9412GV2, D7212GV3, D7412GV3, D9412GV3, D7212GV4, D7412GV4, D9412GV4, EN4200, B820
RPS connection to the IP of the Cellular Card when using a B450 on any the following panels, GV2 with Firmare 7.06 and higher, GV3 Firmware 8.0x and the FPD-7024 with Firmware 1.03 and higher.
The B8512G and B9512G have slots for two B430 Plug-in Telephone Communicators to provide redundant telephone connections.
Upon power up the panel uses the B430 in the Mod-1 slot until a Test Report is initiated or when the panel phone supervision declares the line currently in use as failed.
B430, B8512G, B9512G
How to work with duress passcodes and avoid ‘Passcode in Use’ errors.
Why does ‘Passcode in Use’ display when adding a new code and how to prevent the message from displaying.
