Conference & Discussion

If you are facing unknown problems with your DICENTIS wired system and you need advice from the technical support on that we will ask for log files and other information to start our analysis. For that reason this little program was created to make the extraction of all needed log files, system settings and other data more easily to extract. In future it is planed to integrate this in our software.

The DICENTIS cannot handle more than one enabled NIC at the same time and this could lead that it choose the wrong NIC and interrupts the system. This will be specially important if you use your own Server. To solve this problem it is necessary to precisely define the DICENTIS NIC. These next few steps will show you how to do that.

To send or receive a multicast Dante stream for example from different languages it will require some DCNM-LDANTE licenses but if you only need it for import and export audio signals the DCNM-LSYS includes already one channel (floor).

After upgrading to DICENTIS Conference system 3.60, TLS1.0 is disabled for security reasons, and TLS1.2 is enabled. Since the Multimedia device does not support TLS1.2, it does not show logo and participant images anymore.

If you want to get a reliable and safe working discussion system please keep both Windows and DICENTIS up dated! You need to enable  "update your Windows and other Microsoft products" under Advanced setting to get all necessary updates.

Network Docent scans and visualizes the network environment and is giving simple insight into all devices and cable connections of a network based system. This Software can help you to identify network errors and find quick solutions to fix them. You even can extract an Network snapshot which is an important log file for the Technical Support.  

The Conference protocol is a platform-independent protocol which is based on Web-Socket technology to enable scalability of the DICENTIS system and it connects with the DICENTIS web server. This is a small introduction to test if the web socket is basically working and if the connection is right.

DICENTIS installation log files are needed for further analysis for Technical support team if the software update failed or later some errors occurred. Below it is explained how you can extract DICENTIS installation log files.

In some cases the log file from the Dicentis Server become too big and it has to be cleared to reduce the size from time to time. The normal size is between 10MB and 50MB depending on the operation time but it should normally not grow over 100MB. If it does exceed, is most likely a fatal error within the DICENTIS system which produce a lot of logging each minute. It could be possible that the driver of the Network Card (3rd party Server) to become intermittent and the log file to grow to 300MB. In the next steps we will show you how to clear the logging.

If something is not working well in the Microsoft Windows Server it will be recorded in the Event Viewer (log files) and can indicate where the error occurs. This is a good tool for the Technical Support to figure out if there are considerable issues in the Windows and other programs.

This short instruction will show you how to return and activate DICENTIS licenses with the old license model. It is capt for documentation purpose since some old license system are still in the market. This instruction is only meant for the old license model with DCNM-LSYS and single function licenses which we stopped selling in 2024 and must be changed at some point in time to the new license model if you want to have further updates of our software. We will make special offers after the SMA extinguished to our customers and we expect that most of them will be switching within 5 years to Premium or Ultimate our new participant based license system. The new license system does only work with >5.00 or higher wile the register function was already implemented in 4.40.

The new INT-TXO Integrus Transmitter integrates the Integrus system in the DICENTIS via OMNEO. Old Radiators and Receivers stay the same and existing equipment can be used in the DICENTIS now with the new INT-TXO transmitter. It is usable from software version 4.20 onward and is made for DICENTIS only usage at the moment. But it will be open up in future for the usage of 3rd party devices which than are planned to be managed with the Dante Controller software. Please visit our product page for more information. 

The DICENTIS Server has a own log file system which is working in the back ground and is called LogDump. If something went wrong during the operation it will be reported in there. In many times this is a good tool for error analysis as well as fault detection and will often requested by the Technical Support for pre-analysis. In the next Step-by-step guide it will be shown how to extract the LogDump file form DICENTIS Conference System.

If RSTP is not enabled in an looped system packets will loop infinitely exhausting all available bandwidth and could cause an overflow of MAC address tables. In the end it will result in a broadcast storm and breakdown of the entire network.

The DetectDevices script was developed to give a fast feedback on connection problems or any other failure within the DICENTIS wired system. It will simulate a device and give out an advanced log file which can be used to track sporadic or normal connection problems. The technical support will provide this tool to get a deeper look into some issues if needed.

If you can't see the DICENTIS Server Console Item in the right tab anymore this article will help you to surface them again.

In some cases it could be necessary that you need to maintain the Microsoft SQL database which DICENTIS is using to save participants, user, seats and settings. In the next steps I will explain some of the basics commands.

Possible causes and solution(s) Causes   The Dicentis does not need any additional encryption to be set via the OMNEO Firmware Upload Tool. (OFUT) If you have set this by accident it could lead to that you can not see or update your units with the OFUT any more.   Solution:   stop the Firmware Upload Tool delete the following file  C:\Program Files\Bosch\OMNEO\Firmware Upload Tool\FirmwareUploadHIConfig.ini start the Firmware Upload Tool   Encrypted devices did not show up and you can not update them anymore. Do not set a password for default!   Open and delete this file  C:\Program Files\Bosch\OMNEO\Firmware Upload Tool\FirmwareUploadHIConfig.ini   Open the OFUT and units will appear again.