If ‘Calibration upload to camera failed’ for CPP7.3 & CPP13 Bosch cameras please follow the below steps:
Upgrade Configuration Manager to version 7.61.
This must be used in combination with CPP13 Firmware 8.45 or later
This article it is about analog control system connected directly to the MIC IP serial port. The serial com ports of traditional analog systems head end control systems connect directly to the RS485 input of the MIC IP models listed within this article.
See what you can do when MIC 7000i with FW 7.72 shows blurred images.
After restart, the quality of the image is good for a short time, but the issue reappear.